622541
3
Zoom out
Zoom in
Previous page
1/3
Next page
PointSafe FS
English | 3
Programming PointSafe FP in Standard Mode
Changing user code
Press “On / Enter”.
Then enter the user code. The door automatically opens.
Hold the “On / Enter” button until the yellow “Entry / Programming“
LED flashes.
Enter the new code (3 to 6 digits).
Confirm it with “ON / Enter”.
Entering Programming Mode to Change Master Code
and adding Fingerprints
Press “On / Enter“, then type 76 (program mode), then press “On / Enter”
and enter Master code. The door will automatically open.
The Entry / Programming LED will be flashing and you will be in
programming mode.
Press “On / Enter“, enter Master code. Hold the “On / Enter“ button until the
yellow “Entry / Programming“LED flashes.
Changing Master code (When in Programming Mode)
Type 22 (change master), then press “On / Enter”.
Type the new Master code (8 digits) and confirm with “On / Enter”.
Repeat with the new code and confirm with “On / Enter”.
Master Code has now been changed.
Changing User code (When in Programming Mode)
Type 28 (change user), then press “On / Enter“
Enter new code (3 to 6 digits) and confirm with “On / Enter“
Adding Fingerprint (When in Programming Mode)
Type 23 (add finger), then press “ON / Enter”
Swipe your finger firmly over the fingerprint sensor. The yellow
“Entry / Programming“ LED will flash after each correct swipe.
Repeat this process several times until the “Entry / Programming“
LED lights up permanently in green. Please note this can take up
to 10 swipes of your finger.
Delete all fingerprints
Type 33 (delete finger), then press “On / Enter”.
Switching to hotel mode
Type 46 (hotel mode), then press “On / Enter”.
Switching to standard mode
Type 76 (standard mode), then press “On / Enter”.
Exiting programming mode
Press the “Close / Clear” button twice.
PointSafe FP in Hotel Mode
Open with Master code
Press “On / Enter”, then enter Master code.
The door automatically opens.
Open with User code (when a code is stored)
Press “On / Enter”, then enter the user code.
The door automatically opens.
Open with finger (when a finger is stored)
Press “ON / Enter”, then move your stored finger over the sensor.
The door automatically opens.
Saving finger only (with the door open)
Hold “ON / Enter” until the “Entry / Programming“ LED goes on.
Swipe your finger firmly over the fingerprint sensor. The yellow
Entry / Programming LED will flash after each correct swipe.
Repeat this process several times until the “Entry / Programming“
LED lights up permanently in green.
Please note this can take up to 10 swipes of your finger.
Exit the programming mode using the “Close / Clear” button.
Save user code only (with the door open)
Press “ON / Enter” until the “Entry / Programming“ LED lights up.
Enter the user code and confirm it with “On / Enter”.
When the programming is successful, the “Entry / Programming“ LED
lights up permanently in green.
Close the programming mode using the “Close / Clear” button.
Attention: If a code and a finger is programmed for opening, they
will need to be programmed at the same time and in the correct order
(first finger, then code). New programming deletes all existing data
(Master Code will always remain)
Save finger and User code
Press “ON / Enter” until the “Entry / Programming“ LED lights up.
Swipe your finger firmly over the fingerprint sensor. The yellow
“Entry / Programming“ LED will flash once every time you correctly swipe
your finger over the sensor. Continue until the “Opening“ LED lights up,
whilst the yellow “Entry / Programming“ LED continues flashing.
Enter the user code and confirm it with “ON / Enter”.
Exit the programming mode using the “Close / Clear” button.
Attention: When the door remains open for over 5 minutes, all stored data
(code / finger) are automatically deleted.
Delete guest code / finger, when the safe has been left
locked by the guest
Press “ON / Enter”, then type 34 (delete guest).
Press “ON / Enter”, then enter Master code. The “Entry / Programming“
LED flashes in green and the door automatically opens. At the same
time all the data (user code / finger) are deleted.
Disposal
Dear customer,
Please help us avoid unnecessary waste.
Should you intend to dispose of this device at any time, please remember
that many components of this device contain valuable materials, which can
be recycled.
Please be aware that electrical and electronic equipment
and batteries shall not be disposed of as household waste,
but rather collected separately. Please obtain information
on the collecting points for electrical waste from the
responsible authority of you municipality.
If you have any questions concerning the EC declaration of
conformity, please use info@burg.biz
Errors and changes reserved.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burg-Wachter PointSafe FS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burg-Wachter PointSafe FS in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Burg-Wachter PointSafe FS

Burg-Wachter PointSafe FS User Manual - German - 3 pages

Burg-Wachter PointSafe FS User Manual - Dutch - 3 pages

Burg-Wachter PointSafe FS User Manual - French - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info