622541
2
Zoom out
Zoom in
Previous page
1/3
Next page
PointSafe FS
English | 2
Structure Dear customer,
Thank you for buying a PointSafe FP. This safe was developed and manu-
factured by Burg-Wächter using the latest fingerprint sensor technology.
This Fingerprint (FP) PointSafe has been designed to be used in both
standard and hotel modes. In addition to the keypad and Fingerprint reader,
this safe comes with mechanical emergency override key.
Important: Please read the entire User Manual before
you start programming.
We hope you enjoy your new BURG-WÄCHTER Fingerprint safe.
Important Notes
Store your codes and emergency Override key at a secure location
and Not inside the safe (the emergency lock is located under
the 4 batteries).
For security reasons we recommend you do Not use personal numbers
for example D. O. B and Telephone numbers as your User or Master code.
If the safe is not going to be used for a prolonged period of time,
please remove the batteries.
For hotel mode: See “PointSafe FP in hotel mode” and the attached
guest code instructions.
For security reasons, Both the user and administrator codes should
be changed from there factory settings.
This Fingerprint Pointsafe will only reach its required security level
if correctly bolt fixed to a secure wall or floor.
(Please use the provided anchoring bolts)
For security reasons, the user code should be different from
the Master code.
Please contact your vendor if you have any questions or problems
regarding your PointSafe FS.
General
This PointSafe FP can be operated in both standard mode and hotel mode.
Standard mode: The safe can be operated by using a Master code,
User code and up to 5 fingerprints.
Hotel mode: The safe can be operated by using a Master code,
User code and 1 fingerprint.
The Master code must have 8 digits.
The user code can have between 3 and 6 digits.
Master Code: 12345678 (factory set)
User Code: 168 (factory set)
When an action has been successfully completed, the green “opening
readiness” LED goes on. The red “Denied entry / Blocking time” LED indicates
that the action failed. In such case the original settings are retained.
Illustrations
Close / Clear button
Control of the locking mechanism for automated closing of the bolts.
On / Enter button
Green “Ready” LED
When a valid opening code is entered and programming is successful,
the LED goes on.
Battery replacement symbol
When this LED is on, please replace all 4 batteries
(LR6 / AA / 1.5V / Alkaline).
Entry / Programming LED
When PointSafe is in programming mode, the LED goes on.
When the programming mode is terminated LED goes out.
Denied entry / Blocking time
The LED is on when an invalid code is entered or programming is
incorrect. When a incorrect code is entered three times in a row,
the operation of the safe will be blocked for 5 minutes. The LED will
flash during this time and code entry or fingerprint will not work
during this time.
Technical Data
Blocking times
After 3 wrong code entries for 5 minutes
Power supply
4 x MIGNON LR6 / AA / ALKALINE
Working
temperature
conditions
-15 °C to + 50 °C
up to 95 % rel. air humidity (noncondensing)
Signal Tones
1 x During opening or closing
2 x Fingerprint sensor defective or a contact problem
3 x No guest code stored in hotel mode
8 x Motor or bolt mechanism blocked
Setting up PointSafe
Remove the screw from the battery compartment side
Shift the front panel cover cap with the PointSafe logo down
Insert the batteries (4 pieces, LR6 / AA / 1.5V / Alkaline)
The electronics will need approx. 30 sec. to load the program.
Then press the “Enter” button
Enter the user code (168)
Press the “Enter” button again
Now the safe can be opened and individually programmed
Standard Mode
Opening with Master code
Press “On / Enter”, then enter the Master code.
The door automatically opens.
Opening with User code
Press “On / Enter”, then enter the User code.
The door automatically opens.
Open with finger
Press “On / Enter”, then move your stored finger over the sensor.
The door automatically opens.
Close
Press the “Close / Clear” button.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Burg-Wachter PointSafe FS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Burg-Wachter PointSafe FS in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Burg-Wachter PointSafe FS

Burg-Wachter PointSafe FS User Manual - German - 3 pages

Burg-Wachter PointSafe FS User Manual - Dutch - 3 pages

Burg-Wachter PointSafe FS User Manual - French - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info