678322
113
Zoom out
Zoom in
Previous page
1/115
Next page
LCD Message Description Corrective Action
E11 Fan Failure
An error occurred in the fan
speed.
Check that no foreign objects or dust are clogging
the fan. If any foreign objects or dust are found,
use a pair of tweezers, air duster, or other tools to
remove them. If the error is displayed again, contact
Buffalo technical support for assistance.
E12 Cooling Failure
A rise in the system temperature
may have exceeded the
allowable safety value.
Do not place objects in the area around the
TeraStation. Also, move the TeraStation to a cool
location.
E16 Drive x Not
Found
Unable to find the drive.
The drive may be disconnected or may have failed.
After shutting down, reinstall the drive.
E30 Replace Drive x
An error occurred, so the drive
was removed from the volume.
Replace the drive.
I10 System Is
Overheating
A rise in the system temperature
may have exceeded the
allowable safety value.
Move the TeraStation to a cool location. Do not place
objects in the area around the TeraStation.
I12 Degraded Mode Operating in degraded mode.
Check if the E30 message is also displayed on the
LCD panel. In such a case, refer to the corrective
action for the E30 message. If only this message is
displayed, refer to the “I12 Message Appears Despite
No Drive Errors section in chapter 8.
I18 Rebuilding Drive
x...
Rebuilding the volume.
Note: Transfer speeds are slower
during the rebuilding process.
Wait until resynchronization finishes. It will take
about 23 hours for a RAID 5 volume and about 2–3
hours for a mirrored volume per a 4 TB TeraStation
model. This message will disappear when
resynchronization finishes.
I33 Replication
Failure
An error occurred in replication.
From Buffalo Replication, click Sync to execute
resynchronization. If the error is displayed again,
contact Buffalo technical support for assistance.
I52 New Firmware
Available
A new firmware version has been
released.
Update the firmware.
I54 Backup Job x
Failed
The backup job failed.
Make sure that the backup job is configured
correctly. Make sure that the NAS is on and not in
standby mode. If the backup job still fails, check
the status of NAS, network, and backup source and
destinations. Also, check the backup log to see if any
errors were recorded.
Default Settings
Administrators Name Administrator
Password password
Shared Folders
Drives C and D are configured as administrative hidden shares
by Windows Storage Server’s default settings.
DHCP Client
Normally, the TeraStation will get its IP address automatically
from a DHCP server on the network. If no DHCP server is
available, then an IP address will be assigned as follows:
IP Address: IP address will be assigned starting from “169.254”.
Subnet Mask: 255.255.0.0
Registered Groups Windows Storage Server’s default groups are registered.
Microsoft Network Group Setting WORKGROUP
110
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo TeraStation WS5420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo TeraStation WS5420 in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buffalo TeraStation WS5420

Buffalo TeraStation WS5420 User Manual - German - 122 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info