678368
89
Zoom out
Zoom in
Previous page
1/93
Next page
Dual Imaging
(1) If switching the firmware to version 1.0.3.32 or earlier when the current firmware version is version 1.0.3.36 or
later and the current Settings password is longer than 8 characters, the Settings username and password will
revert to the default (the username will be “admin, and the password will be “password”).
(2) If you do not save any changes on Settings after changing the firmware version to an earlier one, the username
and password will revert to the original if you switch to firmware version 1.0.3.36 or later.
Image 1 (Active):
Ver.1.0.3.36 or later
Username: buffalo
Password: 123456789
Image 2:
Ver.1.0.3.32 or earlier
Image 1:
Ver.1.0.3.36 or later
Image 2 (Active):
Ver.1.0.3.32 or earlier
Username: admin
Password: password
(1) Switch the
firmware to an
older version.
(2) Switch the firmware
to a newer version
without saving any
changes on Settings.*
Example:
* If you click [Apply] on any Settings page after (1), the usename and the password that had been set while
running firmware version 1.0.3.32 or earlier will remain the same after switching the firmware to version 1.0.3.36
or later.
Backing Up and Restoring Settings
If you set the Settings password to be 8 characters or longer and save the settings to a file while running firmware
version 1.0.3.36 or later, the Settings username and password will not be restored from that file if the unit is running
firmware version 1.0.3.32 or earlier. In that case, the username and the password will revert to the default. The
username will be “admin, and the password will be “password”.
Username: buffalo
Password: 123456789
A Settings File
Username: admin
Password: password
(1) Save the settings
to a file.
(2) Restore the settings
from the Settings file.
Ver.1.0.3.36 or later
Example:
Ver.1.0.3.32 or earlier
Technical Support
North America
https://www.buffalotech.com/support
Europe
http://www.buffalo-technology.com/contact/
88
Appendix A Specifications
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buffalo BS-GS2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buffalo BS-GS2024 in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info