555374
7
Zoom out
Zoom in
Previous page
1/8
Next page
4
Troubleshooting
Logano G115 WS US/CA – 6 720 804 873 (2012/10) 7
Information on the boiler room
3.7 Why is regular servicing important?
Heating systems should be regularly maintained for the following
reasons:
to achieve a high level of efficiency,
to operate the system economically (low fuel consumption),
to maintain the cleanest possible combustion.
4 Troubleshooting
4.1 Identifying operating modes and resetting faults
Two type of fault are distinguished:
Burner faults and
Control and heating system faults
If there is a burner fault the fault indicator lamp on the burner comes on
(Æ burner documentation). Such faults can generally be reset by
pressing the reset button on the burner.
Controls and heating system faults are indicated on the control unit
display if it has one. More detailed information can be found in the
controls' documentation.
Fig. 5 Resetting the burner
[1] Burner
Correcting burner faults
B Press reset button on burner.
CAUTION: Risk of boiler damage from contaminated
combustion air.
B Keep the combustion air free of corrosive substances
(e.g. halogenated hydrocarbons that contain chlorine
or fluorine compounds).
B Prevent heavy accumulation of dust.
CAUTION: Risk of system damage from water.
B In the event of severe risk of flooding, disconnect the
boiler from its power supply and shut off the fuel
supply before water enters the boiler room.
B After the flood has subsided, ask your installer to
check the heating system before starting it up again.
B All parts that have been in contact with flood water
must be replaced by a qualified heating contractor.
CAUTION: Risk of system damage due to lack of or
inadequate cleaning and maintenance.
B Have your heating system inspected, cleaned and
maintained by a heating contractor once a year.
B We recommend you sign a contract covering an
annual inspection and maintenance on an as-required
basis.
CAUTION: Risk of system damage due to too many
resets. Always follow the burner manufacturer's
instructions.
Too many resets can damage the bur-ner's ignition
transformer.
B Do not press the reset button more than three
times in a row. If the fault does not reset after the
third attempt, localize and rectify the fault with
the help of the burner documentation. Notify a
service contractor if necessary.
CAUTION: Risk of system damage from freezing.
The heating system can freeze up in cold weather if
it has been switched off or disabled by a fault
shutdown.
B Rectify the fault immediately and restart the
heating system.
B If that is not possible, protect the heating system
against freezing by draining it at the lowest point.
Canadian installations of this boiler are required to be
equipped with a blocked vent switch (WMO) that
interrupts the burner in case of an obstructed flue gas
pipe. Call your boiler service technician if you suspect
the WMO may have tripped.
1
6 720 615 225-04.1RS
7


Need help? Post your question in this forum.

Forumrules
1

Forum

buderus-logano-g115-ws

Reset search

  • Every time I punch red button the boiler starts up but within a minute it shuts down. Why? Submitted on 3-10-2022 at 20:31

    Reply Report abuse
  • Every time I hit ted circular button boiler starts up but within a minute shuts off. I have a GS 115 Buderus Logano Submitted on 3-10-2022 at 20:26

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Buderus Logano G115 WS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Buderus Logano G115 WS in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Buderus Logano G115 WS

Buderus Logano G115 WS Installation Guide - English - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info