718503
17
Zoom out
Zoom in
Previous page
1/17
Next page
What to do when
Troubleshooting (continued)
Problem Solution
The display
remains blank
after you have
turned on the
P-touch
labelling
machine.
Check that the batteries are
correctly installed. See the
Installing Power Supply and
Tape Cassette section.
The batteries may be weak.
Replace them.
Check that the AD-24ES
Adapter is correctly connected.
When the
label is
printed, there
is too much
margin
(space) on
both sides
of the text.
See the Setting Margins section
in this guide and select [Half],
[Narrow] or [Chain Print]
to have smaller margins for your
labels.
The P-touch
labelling
machine
does not print,
or the printed
characters
are not
formed
properly.
Check that the cassette is
inserted correctly.
If the cassette is empty,
replace it.
Check that the Tape Cassette
Cover is closed correctly.
The setting
has cleared
on its own.
The batteries may be weak.
Replace them.
When power is disconnected for
more than three minutes, all text
and formats in the display
settings are cleared.
A blank
horizontal line
appears
through the
printed tape.
There may be some dust on the
Print Head. Remove the cassette
and use a dry cotton swab to
gently wipe the Print Head with
an up-and-down motion. See the
Installing Power Supply and
Tape Cassette section for the
Print Head location.
The P-touch
labelling
machine has
“locked up”
(nothing
happens
when a key
is pressed,
even though
the P-touch
labelling
machine
is on.)
For more information, see the
Resetting the P-touch
Labelling Machine section.
The power
turns off when
you try to
print.
The batteries may be weak.
Replace them.
Check that the batteries are
correctly inserted.
The wrong AC Adapter is used.
We recommend using the
AD-24ES Adapter.
The tape does
not feed
correctly or
the tape gets
stuck inside
the P-touch
labelling
machine.
Check that the end of the tape
feeds under the tape guides.
For more information, see the
Installing Power Supply and
Tape Cassette section.
The Cutter Lever was pressed
while printing. Do not touch
the Cutter Lever during printing.
To change
language
setting.
For more information, see the
Initial Settings section.
Problem Solution
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother P-Touch E110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother P-Touch E110 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother P-Touch E110

Brother P-Touch E110 User Manual - German - 17 pages

Brother P-Touch E110 User Manual - Dutch - 17 pages

Brother P-Touch E110 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info