1865
27
Zoom out
Zoom in
Previous page
1/30
Next page
25
The Brother print server is equipped with a web server that allows you to monitor its status or
change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol).
If you wish to reset the print server back to its default factory settings (including password),
please follow these steps:
1 Turn off the printer.
2 Make sure that the front cover is closed and the power cord is plugged in.
3 Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until
the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner,
Drum and Paper LEDs are off.
4 Press the Go button six times. Make sure that all the LEDs light up when the print server has been
reset to its default factory settings.
The Printer Settings Page lists all the current printer settings, including network settings. To
print the Printer Settings Page, press the Go button three times.
Web browser
The User Name is 'admin' and the default Password is 'access'. You can use the web browser to
change this password.
Network User's Guide Chapter 2.
Network Factory Default Setting
Print the Printer Settings Page
Setting Up
Your Printer
Windows
®
USB
Windows
®
Parallel
Windows
®
Network
Macintosh
®
USB
Macintosh
®
Network
Installing the Printer Driver
For
Administrators
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brother HL-2030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brother HL-2030 in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brother HL-2030

Brother HL-2030 User Manual - English - 109 pages

Brother HL-2030 Installation Guide - German - 30 pages

Brother HL-2030 User Manual - German - 104 pages

Brother HL-2030 Installation Guide - Dutch - 32 pages

Brother HL-2030 User Manual - Dutch - 105 pages

Brother HL-2030 User Manual - French - 110 pages

Brother HL-2030 Installation Guide - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info