Manual Brondi fx 400 twin (page 7 of 48) (English, German, French, Spanish)

368294

Zoom out

Zoom in

1/48

- 7 -

Note: Once you set the DCS code, CTCSS will automatically set to off mode or vise versa.

Transmitting and Receiving

The FX-400 transmission is “one way-at-a-time.” While you are speaking, you can not

receive a transmission.

The FX-400 is an open-license band. Always identity yourself when transmitting on the

same channel.

3.4.3 Transmitting (sending a speech)

The unit is continuously in the Receive mode when the unit is turned ON and not transmitting.

When a signal is received on the current channel, “RX” will be displayed on the LCD Screen

and the receiver LED lights up.

Transmitting (sending a speech)

a. Press and hold the PTT (push to talk) button to transmit your voice. “TX’ will be

displayed on the LCD Screen.

b. Hold the unit in a vertical position with the MIC (Microphone) 5 cm away from the

mouth. While holding the PTT button, speak into the MIC (microphone) in a

normal tone of voice.

c. Release the PTT button when you have finished transmitting.

3.4.4 Monitor

You can use the Monitor feature to check for weak signals on the current channel.

a. Press the MENU and DOWN buttons at the same time, “RX” will be displayed on

the LCD Screen. Your FX-400 will pick up signals on the current channel, including

background noise.

b. Press the PTT button to stop the channel monitoring.

3.5 Setting the VOX (Voice Activated) Sensitivity

In VOX mode, the FX-400 will transmit a signal only when it is activated by your voice or other

sounds around you. The unit will transmit further for 2 seconds even if you stop talking.

The level of VOX sensitivity is shown by a number on the LCD Screen. At the highest level,

the units will pick up softer noise (including background noise); at the lowest level, it will pick

up only quite loud noise.

a. Press the MENU button 4 times, “VOX” will be displayed and “OF” flashes on the

LCD Screen.

b. Press the UP button to set the VOX sensitivity level (the maximum level is “3”). To

deactivate the VOX function, press the DOWN button until “OF” appears on the

LCD Screen.

c. Press the PTT button to confirm your setting. “VOX” will steadily appear on the

LCD Screen as along as the VOX feature is activated.

VOX operation is not recommended if the FX-400 will be used in a noisy or windy

environment.

3.6 Activating the auto Channel and sub-channel Scan

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brondi fx 400 twin in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brondi fx 400 twin Manual

Product: