368294

Brondi fx 400 twin Manual

6
Zoom out
Zoom in
Previous page
1/48
Next page
- 6 -
3.2 Turning the Unit ON/OFF
To Turn ON;
a. Press and hold the POWER button until the LCD Screen turns ON and displays
the current channel.
To switch OFF;
b. Press and hold the POWER button until the LCD screen turns blank.
You can hear a musical tone each time to confirm.
3.3 Adjusting the Speaker volume
The volume level is shown by vertical bars the LCD screen. You can change the volume while
using your FX-400, or while the unit is idle (switched on but not in use).
press the UP button to increase, or press the DOWN button to decrease the speaker volume.
3.4 Changing Channels
The FX-400 has 8 available channels, to communicate with other FX-400 users within a range,
you must all have your FX-400 tuned in to the same channel.
a. Press the MENU button once, the current channel number flashes on the LCD
Screen.
b. Press the UP or DOWN button to select the desired channel
c. The channel changes from 1 to 8, or vice versa.
d. Press the PTT button to confirm the channel setting.
Note: Refer to the “Channel Table” section of this Owner’s Manual for detailed frequency
listing.
3.4.1 Setting the CTCSS sub-channel
Each channel also has 38 sub-channels to let you set up group of users within the same
channel for more private communication. If you have set the sub-channel, you can only
communicate with other PMR users turned to the same channel and sub-channel.
a. Press the MENU button twice, the current CTCSS sub-channel number flashes on
the LCD Screen.
b. Press the UP or DOWN button to select one of the 38 CTCSS sub-channels.
c. Press the PTT button to confirm the sub-channel setting.
To turn the sub-channel function off, simply set the sub-channel to 0 (zero). You can
communicate with any FX-400 user set to the same channel who also turns off the
sub-channel operation (or whose FX-400 unit does not have the feature).
3.4.2 SETTING THE DCS ADVANCED DIGITAL CODE.
Each channel also has 83 digital codes to let you set up group of users for more secured
private communication.
a. Press the menu button 3 times. DCS code flashes on the LCD screen.
b. Press the UP or DOWN button to select the desired DCS code.
c. Press PTT button to confirm the DCS setting.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Brondi fx 400 twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Brondi fx 400 twin in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info