Manual Brinno TLC120 (page 1 of 2) (English, German, Dutch, French, Italian, Spanish)

785771

Zoom out

Zoom in

1/2

1. シャッターボタン

2. ストラップホール

3. メモリカードカバー

3-1.

マイクロUSB差込口

3-2.

ＳＤカードスロット

4. LEDランプ

Wi-Fi/Bluetoothランプ

6.

電源スイッチ

7. レンズ

8. 三脚用ネジ

LEDランプの表示について

赤色（バッテリー）

•要充電

•SDカードエラー

1. Tlačítko spouště

2. Očko pro řemínek

3. Kryt paměťové karty

3-1. Konektor Micro USB

3-2. Slot pro SD kartu

4. LED indikátor stavu

5. Indikátor Wi-Fi /

Bluetooth

6. Vypínač ON/OFF

7. Objektiv

8. Závit pro stativ

LED indikátor stavu

Červená (baterie):

• Vybité baterie

• Chyba SD karty

Zelená (nahrávání):

• Pořízení snímku: blikne jednou při

pořízení snímku

• Standby: Stiskněte tlačítko OK,

blikne jednou

Modrá (Wi-Fi/BLE):

• Připojování: bliká

• Wi-Fi / BLE: on

1. Auslöser

2. Trageriemenöse

3. Abdeckung für

Speicherkarte

3-1. Micro USB Buchse

3-2. SD Card Slot

4. Status-LED-Anzeige

5. WLAN /

Bluetooth Lampe

6. Power ON /

OFF-Schalter

7. Objektiv

8. Stativbefestigung

Status-LED-Anzeige

Rot (Batterie):

• Batterie schwach

• SD-Kartenfehler

Grun (Aufname):

• Erfassung: blinkt einmal während

der Aufnahme

• Standby: Drücken Sie die Taste OK,

blinkt Einmal

Blau (Wi-Fi/BLE):

• Anschluss: Blinken

• Wi-Fi / BLE: ein

1. Botón Obturador

2. Resquicio para pulsera

3. Tapa de Tarjeta de Memoria

3-1. Puerto Micro USB

3-2. Compartimento de Tarjeta SD

4. Indicador de Estado LED

5. Indicador Wi-Fi / Bluetooth

6. Interruptor de Energia ON/OFF

7. Lente

8. Montura para Trípode

Indicador de Estado LED

Rojo (Energia):

• Energia Baja

• Error de Tarjeta SD

Verde (Grabación):

• Durante la grabación: parpadea una vez

• En espera: Presiona botón OK, parpadea

una vez

Azul (Wi-Fi/BLE):

• Conectando: Parpadea

• Wi-Fi/BLE Encendido: encendido

1. Déclencheur

2. Œillet pour strap

3. Couvercle carte mémoire

3-1. Douille Micro USB

3-2. SD Card Slot

4. Indicateur d'état LED

5. Lampe Wi-FI/Bluetooth

6. Power ON / OFF

7. Objectif

8. Trépied

Indicateur d'état LED

Rouge (Batterie):

• Batterie faible

• Erreur de carte SD

Vert (enregistrement):

• Capture: clignote une fois lors de la capture

• Veille: Appuyez sur le bouton OK,

clignote une fois

Bleu (Wi-Fi/BLE):

• Connexion: clignotant

• Wi-Fi / BLE ON: marche

Power on the Camera

Zapnutí kamery

Schalten Sie die Kamera an

Encender la Cámara

Allumez l'appareil photo

Включение камеры

相機開關

相机开关

カメラの電源をオンにします

카메라의 전원

Connecting_(AP (Access Point) Mode)

Připojení_Režim AP (přístupový bod)

Anschließen_AP (Access Point) Modus

Conectar_Modo AP (Punto de Acceso)

Connexion_AP Mode (Access Point)

Camera Parts

Části kamery

Kamerateile

Partes de la Cámara

Pièces de l'appareil photo

Детали камеры

相機內容

相机部件

パーツ

카메라 부품

Installing the SD Card

Vložení SD karty

Einlegen der SD-Karte

Instalar la Tarjeta SD

Installation de la carte SD

OFF

3-2

3-1

1. Shutter Button

2. Strap Eyelet

3. Memory Card Cover

3-1. Micro USB Socket

3-2. SD Card Slot

4. Status LED Indicator

5. Wi-Fi / Bluetooth Lamp

6. Power ON/OFF Switch

7. Lens

8. Tripod Mount

Status LED Indicator

Red (Battery):

• Battery Low

• SD Card Error

Green (Recording):

•

Blue (Wi-Fi/BLE):

• Wi-Fi/ BLE ON: on

!* Battery charging, LED Orange. / Battery full, LED green.

Charging the camera via a Micro USB adapter (Camera should be turned O)

* First time battery charge requires 6 hours.

1. Turn ON Bluetooth

2. Turn ON WiFi, select your

camera WiFi SSID (TLC120-XXXXXXXX)

Password: 12345678

Step-1 On your phone settings,

1. Tap camera icon ,

2. Select your camera ID then

tap “CONNECT”.

3. You will see the Main Screen,

now have fun with your Brinno

time lapse camera.

Step-2 On your camera APP,

Camera

* The default WiFi connection mode is AP (access point).

To change to Hotspot mode please refer to the User

Manual available at: www.brinno.com/tlc120

!* Even with no WiFi connection, you can use the

App to control the camera via Bluetooth.

Searching Camera

CONNECT

Camera 225 / FFDE24XX

TLC120-XXXXXXXX

Camera 225 / FFDE24XX

Bluetooth

OFF ON

WiFi

OFF ON

WiFi

TLC120-XXXXXXXX

OFF ON

TLC120-XXXXXXXX

********

1. 開啟藍牙

2. 開啟Wi-Fi, 選擇相機Wi-Fi SSID

(TLC120-XXXXXXXX) 密碼:12345678

步驟1: 手機設定

1. 在APP上點 ,

2. 選擇相機ID，接著點”Connect”

3. 進入主畫面後，就可以好好玩BRINNO縮時相機了

步驟2: APP設定

Camera

* 若要從AP模式轉換為熱點(Hot Spot)模式，可參閱

以下網址: www.brinno.com/tlc120

!* 在沒有連接Wi-Fi的情況下，藍牙裝置可控制App

Charging the Camera Battery

Dobíjení baterie kamery

Aufladen der Kamera-Batterie

Cargar la Bateria de la Cámara

Charger la batterie de l'appareil photo

Зарядка аккумулятора

相機電池充電

充电

バッテリーを充電します

카메라 배터리를 충전하기

Installing the Brinno Camera App on your smartphone

Installieren des Brinno Kamera App auf Ihrem Smartphone

Instalar el Brinno Camera App en su celular

Installation de l'App Brinno Caméra sur votre smartphone

Установка приложения Brinno на Ваш смартфон

手機下載Brinno Camera App

手机下载Brinno Camera App

スマートフォンにBrinnocameraアプリを

インストールして下さい。

스마트폰에 브리노 카메라 앱을 설치합니다

Installazione dell'app per fotocamera Brinno sullo smartphone

Het installeren van de Brinno Camera App op uw smartphone

Instalace aplikace Brinno Camera na váš smartphone

Camera

1. Schalten Sie Bluetooth ein

2. Schalten Sie WLAN ein, wählen Sie Ihre

Kamera WiFi SSID (TLC120-XXXXXXXX)

Passwort: 12345678

Schritt 1 Klicken Sie auf Einstellungen,

des Telefons

1. Tippen Sie auf Kamera-Symbol ,

2. Wählen Sie Ihre Kamera-ID, tippen Sie dann

auf "CONNECT".

3. Sie erhalten den Hauptbildschirm, zu sehen,

haben Sie jetzt Spaß mit Ihrem Brinno zeitraer.

Schritt-2 auf der Kamera-App,

* Die Standard-WLAN Anschluss-Modus ist AP (Access Point).

Bedienungsanleitung unter: www.brinno.com/tlc120

!* Auch ohne WLAN-Verbindung, können Sie die App

verwenden, um die Kamera über Bluetooth zu steuern.

Camera onderdelen

1. Кнопка спуска

2. Ушко для ремешка

3. Крышка отсека

карты памяти

3-1. Разъем Micro USB

3-2. Слот для SD Card

4. LED индикатор статуса

5. Индикатор Wi-Fi /

Bluetooth

6. Выключатель ON/OFF

7. Объектив

8. Крепление штатива

LED индикатор статуса

Красный (батарея):

• Батарея разряжена

• Ошибка карты памяти

Зеленый (Запись):

• Съемка: мигает только

в момент снимка

• Ожидание: нажмите кнопку OK,

мигает один раз

Синий (Wi-Fi/ Bluetooth):

• Соединение: мигает

• Wi-Fi/ Bluetooth подсоединен:

горит непрерывно

Установка карты

памяти (SD Card)

De SD kaart installeren

記憶卡裝置

存储卡安装

SDカードを挿入します

SD 카드를 삽입

1. Tasto di scatto

2. Passante cinghietta

3. Coperchio scheda

di memoria

3-1. Presa micro USB

3-2. Slot scheda SD

4. Indicatore di stato LED

5. Spia Wi-Fi / Bluetooth

6. Interruttore accensione/

spegnimento

7. Obiettivo

8. Attacco treppiedi

1. Sluiter knop

2. Oogje voor riem

3. Geheugenkaart deksel

3-1. Micro USB aansluiting

3-2. SD kaart sleuf

4. Status LED indicator

5. WiFi/Bluetooth lamp

6. Power aan/

uit schakelaar

7. Lens

8. Statief mount

Status LED indicator

Rood: (Batterij):

• Batterij bijna leeg

• SD kaart fout

Installazione della

scheda SD

Соединение_

Режим AP (точка доступа)

連接＿AP模式(基地台模式)

连接_AP模式(基地台模式)

接続しますＡＰ（アクセスポイント）モード

접속_AP(접근)모드

היצקילפאה תנקתהBrinno Camera ןופלטבךלש םכחה

Parti della fotocamera

סיטרכ תנקתהSD

המלצמה תללוס תניעט

Carica della batteria della fotocamera

De camerabatterij laden

תועש Accensione della fotocamera

Zet de camera aan

Connessione_Modalità AP (access point)

Aansluiten_AP (Acces point) modus

Camera

בלש1 – :ךלש ןופלטה תורדגהב

1 . לעפהBluetooth

2 . רוביח לעפהWiFiה רוביח ןקתה תא רחב ,-WiFi

) המלצמה לשTLC120-XXXXXXXX(

:המסיס12345678

בלש2 – :המלצמה תייצקילפאב

1 ןוקייאה לע ץחל .

2רחאלו ךלש המלצמה ההזמ תא רחב .- שקה ןכמ

"רבחתה" לע

3 . לכות תעכ ,ישארה ךסמה תא הארתתונהיל

םע תמלצמ

Brinno Time Lapse

רוביח אלל םג*Wi-Fi היצקילפאב שמתשהל ןתינ ,

תועצמאב המלצמב טולשל ידכBluetooth

ה רוביח לש לדחמה תרירב בצמ*-WiFi אוהAP

בצמל תונשל ידכ .(השיג תדוקנ)Hotspot ןייעל שי ,

:תבותכב שמתשמל ךירדמבwww,brinno.com/tlc120

Blauw (WiFi/BLE):

• Verbinden: knippert

• WiFi/BLE: aan

1 .םוליצ ןצחל

2העוצרל האלול .

3ןורכיז סיטרכ יוסיכ .

3.1 עקש .Micro USB

3.2 סיטרכ ץירחSD

4יוויח תירונ בצמ .

5 תרונמ .Wi-Fi / Bluetooth

6יוביכ / הלעפה ןצחל .

7 .השדע

8הבוצח תבשות .

Groen (Opname):

• Opname: knippert eenmaal

tijdens opnamel'acquisizione

• Standby: Druk OK knop,

knippert eenmaal

1. 拍攝按鈕

2. 相機吊飾孔

3. 記憶卡蓋

3-1. USB插槽

3-2. 記憶卡插槽

4. LED狀態指示燈

5. Wi-Fi/藍牙狀態燈

6. 電源開關

7. 鏡頭

8. 三腳架插孔

綠燈:

• 照相:綠燈閃爍一次

• 待機:按下開關後，

綠燈閃爍一次

藍燈(Wi-Fi/藍牙):

• 連接藍牙:閃爍

• Wi-Fi/藍牙開啟:持續亮燈

LED狀態顯示燈

紅燈:

• 電力不足

• SD卡錯誤

1. 拍摄按钮

2. 相机吊饰孔

3. 存储卡盖

3-1. USB插槽

3-2. 存储卡插槽

4. LED状态指示灯

5. Wi-Fi/蓝牙状态灯

6. 电源开关

7. 镜头

8. 三脚架插孔

LED状态显示灯

红灯（电量）:

• 电力不足

• SD卡错误

绿灯（记录）:

• 照相:绿灯闪烁一次

• 待机:按下开关后，

绿灯闪烁一次

蓝灯(Wi-Fi/蓝牙):

• 连接蓝牙:闪烁

• Wi-Fi/蓝牙开启:持续亮灯

1. 셔터버튼

2. 스트랩 홀

3. 메모리카드 커버

3-1. 마이크로USB소켓

3-2. SD 카드 슬롯4

4. LED 상태 알림

5. 와이파이 / 블루투스 램프

6. 파워 온 오프 스위치

7. 렌즈

8. 삼각대 마운트

초록(촬영 중):

• 촬영 : 깜박 한 번 캡처하는 동안

• 대기: OK를 누르면 , 한번 깜박입니다

LED 상태 알림

빨강(배터리):

• 배터리 낮음

• SD 카드 에러

파랑 (Wifi/BLE):

• 연결 중: 깜박임

• Wi-Fi/ BLE ON: on

Verde (registrazione):

• Acquisizione: lampeggia una

volta durante l'acquisizione

• Standby: premendo il tasto

OK, lampeggia una volta

Blu (Wi-Fi/BLE):

• Connessione: lampeggiante

• Wi-Fi/ BLE ON: acceso

Indicatore di stato LED

Rosso (batteria):

• Batteria scarica

• Errore scheda SD

緑色（録画中）

•録画中：キャプチャーするタイミング

で光ります。

•待機中：ＯＫボタンを押すと

一回光ります。

青色（WI-FI/BLE）

•接続中：光り続けます。

•Wi-Fi/BLEON:オン

Guida Veloce

Snelle Handleiding

Краткое Руководство

快速指南

クイックガイド

빠른 설명서

k Guide

ý průvodce

Rápida

ךירדמ

Quic

Rychl

Kurzanleitung

Guía

IL ריהמ

Guide de démarrage rapide

301-0151-00 UN A1

OFF

DC IN

5V, 1A

1. Zapněte Bluetooth

2. Zapněte Wi-Fi, vyberte WiFi SSID vaší kamery (TLC120- XXXXXXXX)

Heslo: 12345678

Krok-1 Nastavení vašeho telefonu

1. Klikněte na ikonu kamery ,

2. Vyberte ID vaší kamery a poté klikněte na “CONNECT”.

3. Nyní uvidíte hlavní obrazovku a můžete si užívat

zábavu s vaší časosběrnou kamerou Brinno.

Krok-2 Nastavení aplikace Brinno Camera

Camera

* Výchozí nastavení připojení WiFi je režim AP(přístupový bod).

Pro změnu na režim Hotspot použijte Návod k použití dostupný na:

www. brinno.com/tlc120

!* Aplikaci můžete používat i bez připojení WiFi. Kameru budete ovládat

přes Bluetooth.

1. Encender Bluetooth

2. Encender WiFi, selecionar la cámara

WiFi SSID (TLC120-XXXXXXXX)

Password: 12345678

1. Pulsar simbolo de ,

2. Seleccionar el ID de la cámara y pulsar “CONNECT” para conectar.

3. Verá la pantalla principal. Ahora puede disfrutar con su cámara

time lapse Brinno.

Paso-2 En el App de la cámara

Camera

* El modo de conexión WiFi predeterminado es AP (punto de acceso).

por favor referirse al Manual de

Usuario disponible en: www.brinno.com/tlc120

!* Puede controlar la cámara con el App por medio de Bluetooth

sin tener conexión WiFi.

Camera

1. Activez Bluetooth

2. Allumez WiFi, sélectionnez votre caméra

WiFi SSID (TLC120-XXXXXXXX)

Mot de passe: 12345678

Étape 1 Aller sur paramètres de votre

téléphone,

1.Appuyez sur icône de caméra ,

2. Sélectionnez votre ID de la caméra puis appuyez

sur "Connect".

3. Vous verrez l'écran principal, maintenant

Amusez-vous avec votre Brinno timelapse caméra.

Étape 2 Sur votre App appareil photo,

* Le mode de connexion WiFi par défaut est AP (point d'accès).

Pour passer en mode Hotspot s'il vous plaît se référer au

manuel de l'utilisateur disponible sur: www.brinno.com/tlc120

!* Même sans connexion WiFi, vous pouvez utiliser

l'application pour contrôler la caméra via Bluetooth.

Camera

1. Attivare il Bluetooth

2. Attivare il Wi-Fi e selezionare

l'SSID Wi-Fi della fotocamera (TLC120-XXXXXXXX)

Password: 12345678

Passo 1 Nelle impostazioni del telefono,

Passo 2 Sull'app della fotocamera,

1. Toccare l'icona della fotocamera ,

2. Selezionare l'ID della fotocamera, quindi toccare “CONNETTI”.

3. Quando viene visualizzata la schermata principale, è possibile

utilizzare la fotocamera TimeLapse Brinno.

* Anche senza connessione Wi-Fi, è possibile utilizzare l'app

per controllare la fotocamera tramite Bluetooth.

Per passare alla modalità Hotspot, fare riferimento al manuale

d'uso disponibile su sito: www.brinno.com/tlc120

!* Batterij laadt, LED oranje. / Batterij vol, LED groen.

De camera laden via een MicroUSB adapter (de camera dient uit te staan)

* De eerste lading van de batterij vergt 6 uur.

Зарядка камеры через Micro USB адаптер. (камера должна быть выключена)

* Первая зарядка занимает 6 часов.

!* 充電狀態LED顯示橘色／電力充足LED顯示綠色

外接USB充電(相機電源須關閉)

* 第一次充電須至少六小時

* Батарея заряжается, LED оранжевый. / Батарея заряжена, LED зеленый.

1. Zet Bluetooth aan

2. Zet WiFi aan, selecteer je camera WiFi SSID (TLC120-xxxxxxx)

Wachtwoord: 12345678

Stap 1 Instellingen op de smartphone

1. Klik op het camera ikoon ,

2. Selecteer de ID van je camera en klik dan op “CONNECT”.

3. Je ziet nu het hoofdscherm, veel plezier met je Brinno

timelapse camera.

Stap 2. In de camera App

Camera

* De standaard WiFi verbinding is AP (Access Point). Hoe over te

gaan naar Hotspot modus staat vermeld in de handleiding

die te vinden is op www.brinno.com/tlc120.

* Zelfs zonder WiFi verbinding kun je de app gebruiken om de

camera te bedienen via Bluetooth

1. Включите Bluetooth

2. Включите WiFi, выберите сеть вашей камеры

SSID (TLC120-XXXXXXXX) Password: 12345678

Шаг-1: В настройках телефона,

1. Нажмите значок ,

2. Выберите ID вашей камеры затем нажмите “CONNECT”.

3. Вы увидите главный экран, и теперь можете

развлекаться с вашей таймлапс камерой Brinno.

Шаг-2 В приложении камеры,

Camera

По умолчанию WiFi работает в режиме AP (точка доступа).

Для переключения в режим Хот-спот, пожалуйста, обратитесь

к руководству пользователя по адресу: www.brinno.com/tlc120

Даже без WiFi соединения, вы можете использовать

приложение для управления камерой по Bluetooth.

!* 充电状态LED显示橘色 / 电力充足LED显示绿色

外接USB充电(相机电源须关闭)

* 第一次充电须至少六小时

1. 开启蓝牙

2. 开启Wi-Fi, 选择TLC120 Wi-Fi SSID

(TLC120-XXXXXXXX) 密码:12345678

步骤1: 手机设定

1. 在APP上点 ,

2. 选择TLC120 ID，接着点”Connect”

3. 进入主画面后，就可以好好玩BRINNO缩时相机了

步骤2: APP设定

Camera

* 默认为AP模式，若要从AP模式转换为热点(

Hot Spot)模式，可参阅以下网址:

www.brinno.com/tlc120

* 在没有连接Wi-Fi的情况下，可通过APP控制相机

* バッテリー充電中はＬＥＤがオレンジ色になります。

/ バッテリーの充電が完了すると緑色になります。

Micro USBケーブルを使って充電して下さい。

（カメラのスイッチはＯＦＦにして下さい）

* Batterieladung , LED orange. / Akku voll, LED grün.

Laden Sie die Kamera über einen Micro-USB-Adapter (Kamera sollte ausgeschaltet werden)

* Akku zum ersten Mal laden benötigt 6 Stunden.

םאתמ תועצמאב המלצמה תניעטMicro USB (היובכ תויהל הכירצ המלצמה)

תשרוד הללוסה לש הנושאר הניעט*6

המותכ הרונ ,הללוס תניעט*

האלמ הללוסהקורי הרונ ,

* Dobíjení baterie – oranžová LED. / Baterie nabitá – zelená LED

Dobíjení kamery přes konektor Micro USB. (Kamera by měla být vypnutá)

* První dobití baterie vyžaduje 6 hodin dobíjení.

* Cargando Bateria, LED Naranja. / Bateria Cargada Completamente, LED Verde.

Cargar por medio de un adaptador Micro USB. (La cámara debe estar apagada)

* La primera carga se requiere 6 horas.

* Chargement de la batterie, LED orange. / Batterie pleine, LED verte.

Chargement de la caméra via un adaptateur USB Micro (Camera doit être éteint)

* Première charge de la batterie nécessite 6 heures.

* Carica della batteria, LED arancione./ Batteria carica, LED verde.

Carica della fotocamera tramite adattatore micro USB (la fotocamera deve essere spenta)

* La prima carica della batteria richiede 6 ore.

*初回は6時間以上充電して下さい。

!* 배터리 충전 중에는 LED는 주황색

배터리가 충전이 다 되면 LED는 초록색

마이크로 USB로 카메라를 충전하기 (카메라는 반드시 꺼져 있어야 합니다.)

* 처음 배터리를 충전할 시에는 6시간이 걸립니다

Camera

1. Bluetoothをオンにします。

2. WIFIをＯＮにして、カメラのWIFIと接続します。

SSID (TLC120-XXXXXXXX)

Password: 12345678

Step-1 スマートフォンの設定

1.“ ”のアイコンをタップします。

2.カメラのＩＤを選んで“connect”を

タップします。

3.メイン画面が開きます。

さぁ、これでタイムラプス動画を撮影する準備が出来ました！

Step-2 カメラアプリの設定

!* WIFIが接続出来ない場合、Bluetoothで接続することが可能です。

* デフォルトのWiFi接続モードは、AP（アクセスポイント）です。

ホットスポットモードに変更するにはウェブサイトのユーザー

マニュアルをご参照下さい。www.brinno.com/tlc120

Camera

1.Bluetooth를 켭니다.

2. WiFi를 켜고, WiFi SSID (TLC120-XXXXXXXX)

카메라를 선택합니다 / Password: 12345678

Step-1 스마트폰 설정

1. “ ” 아이콘을 터치합니다

2. 카메라 ID를 선택한 후 “CONNECT”를 터치합니다

3. 메인 화면을 볼 수 있으며 이제 브리노 타임랩스 카메라로

촬영을 즐기시면 됩니다.

Step-2 카메라 앱

* 기본 WiFi연결모드는 AP (접속)입니다. 핫스팟모드로

변경하려면www.brinno.com/tlc120 에서 사용자 매뉴얼을

참조하세요.

!* 만일 WiFi연결이 안되더라도 , Bluetooth를 통해서

카메라를 App으로 사용할 수 있습니다

Více informací nebo návod k použití najdete na:

www.brinno.com/tlc120

Para más información o Manual de Usuario por favor visitar:

www.brinno.com/tlc120

ורקב אנא שומיש תוארוהל וא םיפסונ םיטרפל :רתאב

Per maggiori informazioni o il manuale d'uso,

visitare: www.brinno.com/tlc120

Pour plus d'informations ou guide d’utilisation s'il

vous plaît aller à www.brinno.com/tlc120

www.brinno.com/tlc120

Note

FCC

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limit s for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with

any other antenna or transmitter.

2. This equipment complies with FCC RF radiation exposure limits set forth

for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance

of 20 centimeters between the radiator and your body.

BSMI 有電池產品

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

警告

本電池如果更換不正確會有爆炸的危險，請依製造商說明書處理過之電池。

NCC LP0002

低功率電波輻射性電機管理辦法

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均

不得擅自變更頻率、加大功率或變更原設計之特性及功能。

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干

擾現象時，應改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作

業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻

射性電機設備之干擾。

The information on the sticker (in the box, below) is required

when connecting the camera to a smartphone. If there is

no sticker, refer to the supplied English version of the

instruction manual.

De informatie op de sticker (in de doos, onder) is nodig om

de camera aan te sluiten op een smartphone. Als er geen

sticker is, dan is de betreende info ook te vinden in de

handleiding (engels).

Es imprescindible seguir la información en la etiqueta (en el

cuadro siguiente) cuando conecta la cámara a un celular. Si no

se encuentra la etiqueta, por favor referirse al manual de

instrucción en Inglés.

Informace na nálepce (v rámečku níže) jsou nezbytné pro

připojení kamery ke smartphonu. Pokud se níže žádná

nálepka nenachází, podívejte se do anglické verze tohoto

návodu k použití, která je součástí balení.

Die Informationen auf dem Aufkleber (im Kasten unten) ist

erforderlich, wenn sie auf einem Smartphone die Kamera

anschließen. Wenn es keinen Aufkleber gibt, lesen sie auf die

mitgelieferten englische Version des Handbuches.

L'information sur l'étiquette (dans l'encadré ci-dessous) est

nécessaire pour connecter l'appareil à un smartphone. En

l'absence de autocollant, se référer à la version anglaise du

guide d’utilisation.

Информация на стикере (внутри коробки) предназначена

для соединения камеры со смартфоном. Если стикера нет,

обратитесь к предоставленной английской версии инструкции.

Le informazioni sull'adesivo (nel riquadro in basso) sono

necessarie quando si connette la fotocamera ad uno

smartphone. Se non è presente l'adesivo, fare riferimento

alla versione fornita in lingua inglese del manuale di

istruzioni.

手机APP连接相机装置时，可参阅外盒贴纸的连接信息。

若无贴纸，请参阅英文说明书。

手機APP連接相機裝置時，可參閱外盒貼紙的連接資訊。

若無貼紙，請參閱英文說明書。

パッケージ下部に貼付のステッカー記載情報はカメラと

スマートフォンを接続する際に必要になります。もし

ステッカーが貼付されていない場合は、英文マニュアル

をご参照下さい。

박스 아래쪽의 스티커의 정보는 스마트폰으로 카메라에

접속할 때 필요합니다. 만일 스티커가 없다면 제공된

영문매뉴얼을 참조하세요.

שורד (הטמל ,אספוקב) הקבדמה לעש עדימה

,הקבדמ ןיא םא .ןופטראמסל המלצמה רוביח ןמזב

.הז ךירדמ לש תילגנאה הסרגב ןייע

CAUTION:

Any changes or modications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

For more information or user manual please go to:

www.brinno.com/tlc120

Brinno Camera

המלצמה יקלח

המלצמה תא לעפה

רבחתמ(השיג תדוקנ בצמ)

За информацией или руководством пользователя

можно обратиться на

www.brinno.com/tlc120

詳細資訊與說明，請參閱以下連結:

www.brinno.com/tlc120

Voor meer informatie of de complete handleiding

ga svp naar: www.brinno.com/tlc120

추가 정보 및 사용자 매뉴얼은 여기를 참고하세요:

www.brinno.com/tlc120

详细信息与说明，请参阅以下连结链接:

www.brinno.com/tlc120

詳細情報や詳しい使い方は下記アドレスを

ご参照下さい。

www.brinno.com/tlc120

יוויח תירונ בצמ

(הללוס) םודא

השלח הללוס

סיטרכ תאיגשSD

(הטלקה) קורי

םוליצ ןמזב תחא םעפ בהבהמ :םוליצ

תחא םעפ בהבהמ ,רושיאה ןצחל לע ץחל :הנתמה

) לוחכWiFi / BLE(

בוהבה :תורבחתה

WiFi ואBLE :םילעופON

•

TLC120/TLC120A

Time Lapse Camera

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Brinno TLC120 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1.26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Brinno TLC120

Brinno TLC120 User Manual - English - 49 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Brinno TLC120 Manual

Product: