545952
5
Zoom out
Zoom in
Previous page
1/8
Next page
3
Important !
The triple-core supply cord in fig. 3 is colour-
coded as follows:
Green and yellow - earth
Blue - neutral
Brown - live
Initial operating procedure
The following procedure is to be carried out
when operating a new appliance for the first
time:
1. Clean the inside of the reservoir carefully
with a damp cloth.
2. Switch on the appliance (switch 2, fig. 1)
and make one full reservoir of hot water.
3. Then the hot water can be drained.
4. Empty the water via the drain cock and
dispose of it.
The appliance is now ready for normal use.
Adjustment
Using the screwdriver supplied, the hot water
temperature can be adjusted on the left side
of the appliance. For a higher temperature,
turn the screwdriver to the right. For a lower
temperature, turn the screwdriver to the left.
CAUTION !
Adjust the temperature only when the
reservoir has been filled up to the next to the
highest electrode. The water in the reservoir
should not be allowed to boil.
Fig. 4
OPERATION
Set switch 2 (fig. 1) in the on position.
The water boiler will now be filled
automatically and the water will be heated to
ca. 95
°
C.
Hot water can now be drawn out of the tap.
When the water level in the reservoir falls, it
will automatically be refilled step by step and
the water will be heated.
MAINTENANCE
Warning !
Always stay with the appliance during
maintenance tasks (such as descaling or
cleaning) and keep the instructions given in
the
INTRODUCTION-warnings (points 4
through 9 and 14)
in mind.
Cleaning
The appliance can be cleaned with a damp
cloth. The drip tray, etc., can be washed in
the usual way.
Descaling
Under normal operating circumstances,
calcium deposits will appear in the appliance.
The appliance must be regularly descaled in
order to function properly. When the system
has switched itself off, it is most advisable to
give it a really good descaling.
Pay special attention to removing the
calcium deposits from the two highest
electrodes. (Scrape them off with a small
knife.)
For descaling purposes we advise
RENEGITE, a descaling agent which we
have tested ourselves. The following
instructions are based on the use of one
100 gr. sachet or two 50 gr. sachets of
RENEGITE (read the instructions on the
packet as well).
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bravilor Bonamat HWA20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bravilor Bonamat HWA20 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bravilor Bonamat HWA20

Bravilor Bonamat HWA20 User Manual - German - 8 pages

Bravilor Bonamat HWA20 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info