545952
4
Zoom out
Zoom in
Previous page
1/8
Next page
2
Warning !
For safe operation of the water boiler, pay
close attention to the following points:
1. When the appliance is in operation, some
components will get very hot.
2. If the appliance is unused for a long period
of time, it is advisable to disconnect the
electricity and close the water supply.
3. Under normal circumstances, a small
quantity of water always remains in the
appliance. Please keep this in mind if it is
to be exposed to temperatures below 0
°
C.
4. Stay with the appliance during
maintenance operations (such as
descaling).
5. When working with strong cleaning or
descaling agents, it is most advisable to
wear safety goggles (face protector) and
gloves.
6. Never immerse the appliance in water.
7. After working with strong cleaning or
descaling agents, be sure to wash your
hands.
8. Make sure that all repairs are carried out
by qualified technicians.
9. When the appliance has to be opened for
repairs or maintenance, be sure to
disconnect the electricity.
10. The appliance must always be connected
to the mains in such a way that it can be
easily disconnected.
11. The appliance should be connected to the
water mains with the hose attached to a
hand-operated tap.
12. The appliance must be earthed.
13. Be sure to observe local regulations and
standards when installing the appliance.
14. Prevent spillage of the descaler solution on
to the outside of the machine, this can
cause permanent damage to the exterior
surface of the machine housing. In the
event of a spillage, wipe area affected dry,
whilst observing the safety regulations as
given in the Users Instructions. Directly
afterward the area must be cleaned
thoroughly.
INSTALLATION AND INITIAL OPERATING PROCEDURE
When installing the appliance, keep the
instructions given in the
INTRODUCTION-
warning
(points 10 through 13)
in mind.
Installation
Position the appliance on a solid level base
where it can be easily connected to the
electrical and water mains.
Please take note of the following in regard to
figure 3:
-
If equipped with a fuse plug, the appliance
must be protected with a 13 A fuse.
-
If another plug is installed, the appliance
must be protected with a 15 A fuse.
-
If the plug supplied with the appliance
does not fit into your socket, it should be
cut off and replaced with a new plug The
old plug should then be disposed of, as it
can be dangerous if inserted into a socket.
Keep the following instructions in mind when
installing a new plug:
- The yellow-green core (earth) must be
connected to the terminal marked with
the letter E or the earth symbol ( ) or
coloured green or yellow-green.
- The blue core (neutral) must be
connected to the terminal marked with
the letter N or coloured black.
- The remaining brown core (live) must be
connected to the terminal marked with
the letter L or coloured red.
Fig.3 (220V 1 phase with plug connection)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bravilor Bonamat HWA20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bravilor Bonamat HWA20 in the language / languages: English as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bravilor Bonamat HWA20

Bravilor Bonamat HWA20 User Manual - German - 8 pages

Bravilor Bonamat HWA20 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info