561807
4
Zoom out
Zoom in
Previous page
1/18
Next page
4 October 30, 2001 AM188201_02_V.pdf
Tools required
You will need the following tools to complete this installation:
Phillips-head screwdriver.
An appropriate cutting tool for the surface to be cut. For installation in fiberglass or wood,
we recommend a sabre saw. Use a short blade, and have some extra blades available. A
hole saw may also be used. Large diameter hole saws are available and they allow you to
make circular cuts on a flat surface.
Drill with the following bits:
- For drilling the screw holes a
3
32
inch (.24 cm) bit is preferred, but you could also use a
1
8
(.32 cm) inch bit.
- For drilling the starter hole, use a
5
16
inch (.8 cm) bit.
Center punch or awl.
Half-round file or rasp.
Eye and ear protection; dust mask.
CAUTION:
Failure to follow these instructions voids all warranties on your speakers. If you
are unsure of your ability to complete this process, consult a professional installer. Please
read this owners guide completely before beginning installation.
Unpack the carton
Carefully unpack your speakers and save all packing materials for possible future use. Do not
attempt to use your speaker system if any part of it appears damaged. Notify Bose
®
Corpora-
tion or your authorized Bose dealer immediately. Check that your system contains the parts
identified in Figure 1. For shipping, the mounting flange is packed inside its speaker grille.
Separate these components before installation.
Notes:
Please remove the perforated drilling and cutting template from the inner carton
containing the grille and mounting flange. Also remove the perforated speaker cone shields
from the inner cartons containing the enclosures. You will need the template and shields
during installation.
Now is a good time to record each speaker serial number on page 2 of this guide and on
your warranty card.
Setting Up
Figure 1
Packaging Contents:
Two 131 marine speaker
enclosures
Two mounting flanges
Two speaker grilles
One Owner’s Guide
One template for
positioning, cutting, and
drilling holes
Two speaker cone shields
Mounting hardware:
• 30 screws (6 extra)
• 10 wire nut connectors
(2 extra)
• Two 20 foot speaker
cables, 18-gauge
CAUTION:
The 131
TM
marine speakers are not intended to be installed in automobiles.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bose 131 Marine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bose 131 Marine in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bose 131 Marine

Bose 131 Marine User Manual - English - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info