651986
9
Zoom out
Zoom in
Previous page
1/12
Next page
ing.
Cleaning the glass panel
Cleaning the glass panelCleaning the glass panel
Cleaning the glass panel
If necessary, clean the inside of the glass pane
Open the oven door.
Remove the supports by
loosening the screws lateral-
ly of the supports.
Take off the glass carefully
forward.
after you’
ve cleaned the glass and dried
oughly.
Reverse the bulb
Reverse the bulbReverse the bulb
Reverse the bulb
WARNING:
WARNING:WARNING:
WARNING:
the power supply (fuse).
bulb. There is risk of burns!
There is risk of burns!There is risk of burns!
There is risk of burns!
NO
NONO
NOTE
TETE
TE:
::
:
Use the correct bulb, heat resistant up to 300°C:
1 x 25 W (type G
1 x 25 W (type G1 x 25 W (type G
1 x 25 W (type G9)
9)9)
9)
Unscrew the lamp cover anti-
clockwise and clean
it with a dry cloth.
Change the bulb.
Reattach the
lamp cover and screw it
tight in a clockwise direction.
Check the functionality.
9
Use a soft absorbent cloth for drying afte
r clean-
If necessary, clean the inside of the glass pane
l.
forward.
Replace the glass panel and fasten
the supports
ve cleaned the glass and dried
it thor-
Make sure that the appliance is turned off from
Allow the lamp to cool down before replacing the
Use the correct bulb, heat resistant up to 300°C:
clockwise and clean
lamp cover and screw it
Trou
TrouTrou
Trou
bleshooting
bleshootingbleshooting
bleshooting
Before you contact an
Before you contact an Before you contact an
Before you contact an
authorized specialist
authorized specialistauthorized specialist
authorized specialist
Problem
ProblemProblem
Problem
Possible causes
Possible causesPossible causes
Possible causes
Appliance
does not
work.
The power supply
is
disconnected.
The oven
lamp does
not work.
The bulb is defe
tive,
has been
inserted incorrectly
or not firmly.
NOTE:
NOTE:NOTE:
NOTE:
If a problem still persists after following the steps
above, contact your distributor or an authorized tec
nician.
bleshooting
bleshootingbleshooting
bleshooting
authorized specialist
authorized specialistauthorized specialist
authorized specialist
Possible causes
Possible causesPossible causes
Possible causes
What to do
What to doWhat to do
What to do
The power supply
disconnected.
Check the fuse
of your domestic
wiring system.
The bulb is defe
c-
has been
inserted incorrectly
Check the bulb,
see “Reverse
the bulb”.
If a problem still persists after following the steps
above, contact your distributor or an authorized tec
h-
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EBO 9610 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EBO 9610 IX in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann EBO 9610 IX

Bomann EBO 9610 IX User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info