665763

Black Decker GT6530 Manual

7
Zoom out
Zoom in
Previous page
1/88
Next page
7
ENGLISH
Warning! The extension cable must be suitable for outdoor
use. When using a cable reel, always unwind the cable
completely.
Residual risks
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks cannot be avoided. These include:
Injuries caused by touching any rotating/moving parts.
Injuries caused when changing any parts, blades or
accessories.
Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods make sure you take
regular breaks.
Impairment of hearing.
Health hazards caused by breathing dust developed
when using your tool (example:- working with wood,
especially oak, beech and MDF).
Use
Warning! Let the tool work at its own pace. Do not overload.
Before use, carefully check the tool and mains cable
for damage. Paying attention to guards, switches
and parts.
Ensure that the tool will operate properly and perform
its intended function.
Do not use the tool if damaged or defective.
Do not use the tool if the switch does not turn
it on and off.
If damaged, have the power toll repaired by an
authorised repair agent. Never attempt any repairs
yourself.
Carefully guide the cable in order to avoid accidentally
cutting it. A good way to control the cable is by putting
it over your shoulder.
For your safety, this tool is equipped with a double
switching system. This system prevents starting the tool
inadvertently and will only allow operation while holding
the tool with both hands.
Switching on and off
Switching on
Take hold of the front handle (1) with one hand so that the
front handle switch (2) is pushed into the body of the tool.
With the other hand, squeeze the trigger switch (3) to start
the tool.
Switching off
Release the front handle switch (2) or the trigger switch (3).
Warning! Never attempt to lock a switch in the on position.
Hints for optimum use
Start by trimming the top of the hedge. Slightly tilt the
tool (up to 15° relative to the line of cut) so that the blade
tips point slightly towards the hedge (fig. E). This will
allow the blades to cut more effectively. Hold the tool
at the desired angle and move it steadily along the
line of cut. The double-sided blade allows you to cut
in either direction.
To obtain a very straight cut, stretch a piece of string
along the length of the hedge at the desired height.
Use the string as a guideline, cutting just above it.
To obtain flat sides, cut upwards with the growth.
Younger stems move outwards when the blade
cuts downwards, causing shallow patches in the
hedge (fig. F).
Take care to avoid any foreign objects. Especially avoid
hard objects such as metal wire and railings, as these
could damage the blades.
Regularly oil the blades.
Guidelines for trimming (UK & Ireland)
Trim hedges and shrubs with seasonal leaves
(new leaves every year) in June and October.
Trim evergreens in April and August.
Trim conifers and other fast growing shrubs every
six weeks from May until October.
Guidelines for trimming (Australia & New Zealand)
Trim hedges and shrubs with seasonal leaves
(new leaves every year) in December and March.
Trim evergreens in September and February.
Trim conifers and other fast growing shrubs every
six weeks from October until March.
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance, switch off
and unplug the tool.
After use, carefully clean the blades. After cleaning,
apply a film of light machine oil to prevent the blades
from rusting.
Regularly clean the ventilation slots in your tool using
a soft dry brush or dry cloth.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GT6530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GT6530 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info