Manual Black Decker GD200 verticuteermachine (page 7 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

527514

Zoom out

Zoom in

1/76

ENGLISH

• If your raker starts to vibrate

abnormally (check immediately).

• After striking a foreign object, inspect

your raker for damage and make

repairs as necessary.

• Never run your raker whilst lying on its

side or attempt to stop the tines - always

allow it to stop on its own.

• Do not put hands or feet near or under

rotating parts.

• Keep clear of discharge openings at all

times.

• Start your raker carefully according to the

instructions and with your feet well away

from the tines.

• Do not use your raker in the rain and do

not allow it to get wet. Avoid using your

raker in wet grass, if possible.

• Use your raker only in daylight or good

artificial light.

• Do not pull your raker towards you or

walk backwards when in operation.

• Do not cross gravel paths or roads whilst

the tines are rotating.

• Always be sure of your footing,

particularly on slopes.

• Always cut across the face of slopes, never

up and down. Exercise extreme caution

when changing direction on slopes.

• Do not cut excessively steep slopes and

always wear non-slip footwear.

• Check the grassbag (if supplied) for wear

or damage and replace if necessary.

Never use your raker without the

grassbag in place.

• Walk, never run. Do not force your raker.

• Never pick up or carry your raker while

the motor is running.

• Ensure the tines have stopped rotating

and take extreme care before lifting your

raker for and during transportation.

• Never operate your raker with defective

guards or shields.

Maintenance and storage

• Store your raker in a dry place when not

in use, out of the reach of children.

• Do not use solvents or cleaning fluids to

clean your raker - use a blunt scraper to

remove grass and dirt.

• Always disconnect from the electrical

supply before cleaning.

• Do not operate your raker if any parts are

defective; discard all defective parts and

fit new parts before use.

• Keep all nuts, bolts and screws tight to

be sure your raker is in a safe working

condition.

• Use only Black & Decker recommended

replacement parts and accessories.

Black & Decker’s policy is one of continuous

improvement to our products and, as such, we

reserve the right to change product specifications

without prior notice.

Double insulation

Your raker is double insulated.

This means that all external metal parts are

electrically isolated from the power supply.

This is achieved by placing an extra

insulation barrier between the electrical and

mechanical parts. Double insulation means

greater electrical safety and obviates the

necessity of having your raker earthed.

Electrical safety (UK only)

Your raker should always be switched off at

the mains before disconnecting any plug and

socket connector or extension cables.

Fuse replacement

If your raker is supplied with cable fitted with

a non-re-wireable plug:

• The plug is fitted with a 5 amp fuse

which is the recommended fuse for

your raker.

• Only use replacement fuses which are

approved to BS1362.

• When changing the fuse in your plug,

always ensure the fuse cover is refitted.

If the fuse cover is missing or damaged

do not use the plug.

Note: Fuses do not give personal protection

against electric shock.

Plug replacement

• Disconnect the plug from the supply.

• Cut off the plug and dispose of

immediately. Insertion of a detached

plug into a 5 amp socket outlet may

result in electric shock.

• Only fit BS1363A approved plugs fitted

with the correctly rated fuse.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GD200 verticuteermachine in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Black Decker GD200 verticuteermachine Manual

Product: