527514

Black Decker GD200 verticuteermachine Manual

6
Zoom out
Zoom in
Previous page
1/76
Next page
2
Lawnraker
GD200
Congratulations!
On your purchase of your Black & Decker lawnraker.
This user manual provides important operating and
maintenance instructions for all of the lawnrakers in
the Black & Decker GD200 range.
Know your raker
!
Read all of this manual carefully, observing all
the recommended safety instructions before,
during and after using your raker, and
maintain your raker in good working order.
Familiarise yourself with the controls on your
raker before attempting to operate it, but
above all, be sure you know how to stop
your raker in an emergency.
Retain this user manual and all other literature
supplied with your raker for future reference.
Safety instructions
Training
• Never allow children or persons who are
unfamiliar with this type of raker to use it,
nor anyone who has not read this user
manual.
• Do not allow children, animals or other
persons near your raker when in use -
always keep them at least 6m (20ft) away
from the cutting area.
• Remember that the operator is
responsible for accidents or hazards
occurring to other people or their property.
• Your raker is designed for use on AC
(mains) electrical supplies only - do not
attempt to use it on any other supply.
• Plug your raker into a power point -
never a lighting socket.
!
• Never carry your raker by the cable or
jerk the cable to seperate the
connectors. Keep the cable away from
heat sources, oils or sharp edges. Check
the condition of your cable before use
and do not use if damaged.
Preparation
• To protect your feet, always wear stout
shoes or boots - freshly cut grass is
damp and slippery.
• Rubber or man-made footwear will
enhance your safety.
• Do not operate your raker barefoot or in
open sandals.
• Use protective equipment. Wear safety
spectacles or goggles whilst operating
your raker. Use ear protection if the
sound level seems uncomfortable when
using your raker.
• Use a face mask if dusty.
• Wear long trousers to protect your legs -
any debris left on the lawn or cutting path
may be picked up and ejected by the tines.
• The power supply cable should be
regularly inspected for signs of damage or
ageing, and only used if in good condition.
• Always keep the power supply cable
away from the tines - be aware of its
position at all times.
• Always be sure your raker is in a safe
operating condition.
• Before using your raker, disconnect it
from the electrical supply and visually
check that the tines are not worn or
damaged. A damaged part is a major
hazard and must be replaced.
• Always check that your lawn or cutting
path is clear of all sticks, stones, wire
and other debris. Contact with such
debris may be dangerous or may
damage your raker and could be thrown
by the tines.
Operation
• When tilting the handle downwards (or to
the side) to start your raker, do not tilt it
more than is absolutely necessary.
Always ensure that both hands are in the
operating position and feet are well away
from the tines before returning your raker
to the ground.
• Your raker will continue to run for a short
time after releasing the switch lever.
Always allow your raker to stop on its own.
• Release the switch lever to turn your
raker off and remove the plug from
the mains:
• Whenever you leave your raker
unattended.
• Before checking, cleaning, adjusting
or working on your raker.
• Before clearing a blockage.
User manual
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Black Decker GD200 verticuteermachine at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Black Decker GD200 verticuteermachine in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info