Manual Bertoni F1 (page 7 of 8) (English)

660736

Zoom out

Zoom in

1/8

ADJUSTING THE HEIGHT

OF THE SHOULDER BELTS

1. The correct belt height of the shoulder belts is attained when the belt disappears into the shell

slightly above the shoulder of the child. Ensure that the shoulder belts fit comfortably over the child’s

shoulder. (Fig.15)

2. Loosen the shoulder belts by pressing the push button of the adjuster and pulling the shoulder belts

towards you as far as possible.

Important: Do not pull the belt pads when doing so. (Fig.9)

3. Place the shell of the seat in the sleeping position.

4. Remove the shoulder belts from the yoke. (Fig.16-А).

5. Pull the shoulder belts through the shell and cover out of the belt pads, ensuring that the buckle

remains fixed to prevent the belts from twisting. (Fig.17)

6. If you wish to alter the belts from or to the lowest positions, place the car seat in the sleeping

position.

7. If you wish to alter the belts from or to higher positions, place the car seat in the sitting position.

8. Place the shoulder pads at the desired height and thread the shoulder straps back through the

shoulder pads, cover and shell. (Fig.18)

9. Connect the shoulder belts to the belt yoke. (Fig.19-А)

Fig.15 Fig.16

Fig.16-A

Fig.17 Fig.18 Fig.19

Fig.19-A

pull

Fig.20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bertoni F1 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bertoni F1 Manual

Product: