Manual Bertoni F1 (page 5 of 8) (English)

660736

Zoom out

Zoom in

1/8

INSTALLING THE CAR SEAT

group I /9-18 kg/

The car seat “F1” can only be used with an automatic 3-point safety belt. (Fig.1) The car seat “F1” can

be used in five position (Fig.2): Pull the positioning handle under the front of the seat forwards or

backwards (feel the spring underneath), release the handle on your required position while hearing a

distinct click.

Fig.1 Fig.2

1. Place the car seat in the sleeping position 3 or 4. (Fig. 3)

2. Remove the installation shaft by pulling the moveable part of the lock from the car seat. (Fig.4-А)

3. Pull and hold the shell forward, then thread the seat belt between the shell and the base, fasten the

seat belt with the seat buckle, and ensure the belt is not twisted. (Fig.5)

*Make sure the shoulder belt go from top of the seat and through the lock-off device (Fig.5-А) and the

lap belt go horizontally under the lap belt indicator (Fig.5-В) and joint with the shoulder belt and

buckle up the seat. (Fig.5-С)

4. Return the shell to its original position, and thread the installation shaft into the hole and lock the

device by pushing the moveable part on the other side until hear a distinct click. (Fig.4-В)

5. Adjust the shell to your child’s most comfortable position.

INSTALLATION

Fig.3

Fig.4

Fig.5

pull

push

Fig.5-C

Fig.5-B

Fig.5-A

Fig.4-B

Fig.4-A

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bertoni F1 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bertoni F1 Manual

Product: