Turn thickness dial right back to safe - clockwise
After slicing always reset the thickness dial right back to safe first and switch the slicer off.
Dependent on the slicer setting, please be sure that the dial is turned all the way back.
Exercise particular caution when removing product scraps from the meat tray.
Only do this once the thickness dial has been reset to zero and the slicer has been switched off.
Connection to mains
Check whether the mains voltage matches that given on the slicer. A qualified electrician may only connect “400 Volt three-phase” current slicers.
Connection to the incorrect mains voltage can seriously damage the slicer.
What to do in the event of a malfunction
Switch the slicer off immediately if you hear and/or notice anything unusual. Check in the "
Locating and eliminating failures
” to see if you can rectify
the fault yourself. If not, contact your local service agent.
RSI (Repetitive Strain Injuries)
Continuous use of a slicer may cause Repetitive Strain Injuries or related injuries. Some studies suggest that long periods of repetitive motion coupled with an
improper work environment and incorrect work habits may be linked to certain types of physical discomfort or injury.
If you feel any aching, numbing, or tingling in your neck, shoulders, arms, wrists, hands, or fingers, consult a qualified health professional.
These suggestions can help to reduce your risk of RSI:
- Take frequent breaks from use;
- Be sure to change posture frequently;
- Stand on an anti-fatigue mat or use a standing support to reduce fatigue;
- Keep your hands, forearm and wrists straight and curl your fingers under slightly;
- Set up your workspace.
Cleaning the slicer
Only allow staff who have received appropriate instruction to clean the slicer. Proceed as follows:
-
Reset the thickness dial to safe;
- Switch the slicer off;
- Remove the mains plug from the wall socket;
- Do not use any aggressive and/or abrasive cleaning agents- do not use any steam or high-pressure cleaners;
- Clean the slicer thoroughly especially pointed, sharp and round components.
Careless cleaning can be dangerous for yourself and may invalidate the terms of the guarantee.
Environment
Keep your work place clean and dry, then you will always have a safe environment.
Workplace
Ensure that the slicer is installed in stable fashion on a solid work surface. Check yourself that there is no danger of the slicer sliding or falling.
Ensure that there is sufficient space around the slicer and keep the workplace clean and orderly. Do not use the slicer as a storage area. Place nothing on it
which does not belong there.
Transport
Remember that the slicer is very heavy. The slicer must always be moved by at least two people.
Always seek the assistance of colleagues when moving the machine.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Berkel BSPT at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Berkel BSPT in the language / languages: English as an attachment in your email.
The manual is 2,13 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
