515352
2
Zoom out
Zoom in
Previous page
1/5
Next page
Cleaning unit after brewing coffee
Make sure the units is unplugged and turned off. Open the steam valve and let the steam and pressure out of the machine.
Let it cool. Now you are ready to clean the unit.
Open the unit, empty coffee grounds and rinse machine out thoroughly after use. Never immerse unit in water. Do not let
milk build up on steam jet (5). After you have made a few pots of espresso, it is a good idea to run a cycle of steam through
the coffee valve and steam valve. To do this, simply follow the instructions outlined in Step 1 of PREPARATION OF
ESPRESSO COFFEE. Only this time, leave out the coffee. You can add a few tablespoons of distilled vinegar to the water to
clean any deposits that may have but up in the valves. (Do not add vinegar when you are making coffee.)
For easier cleaning, wipe off both the coffee and steam valves immediately after use.
Never place anything other than water and coffee into the unit, with the exception of vinegar used in cleaning as described
above. NOTE: Neither soap nor scouring will be necessary if you follow the above cleaning instructions.
PREPARATION FOR ESPRESSO
COFFEE
Making espresso the CXE-25 way can be
accomplished in 3 easy steps.
First decide how many cups of espresso you
would like to brew.
STEP 1
Remove the top lid (2) and take out the
coffee brew basket (11). Fill tank with clean
cold water to the desired water level mark
(16) on the inside of the tank for 3, 6, or 9
cups. The water level should never cover the
safety valve hole.
STEP 2
Fill the basket to capacity for 9 cups of
demitasse coffee (basket holds
approximately 1/3 of a cup or 2-1/2 oz. of
coffee).
For 3 or 6 cups place adapter (13) in existing
b
rew basket, then fill with coffee. (Note: the adapter works by decreasing the depth of the brew basket. Coffee goes on top
of the adapter). Number of cups on adapter indicates proper position for 3 or 6 cups.
Use a fine drip grind (not a powder or very fine grind) of dark roasted coffee.
Do not pack down the coffee.
STEP 3
Place the coffee basket back in the tank (make sure to
remove any excess coffee around the rim of the coffee
b
asket and rubber "O" ring in order to guarantee a
tight seal).
Replace the top lid and knob Tighten knob as
securely as possible to get a perfect seal.
W
ARNING: SCALDING MAY OCCUR IF TOP IS
NOT TIGHTENED DOWN COMPLETELY OR IF
TOP IS TAKEN OFF BEFORE MACHINE IS COOL
A
ND ALL STEAM HAS BEEN RELEASED.
Open the coffee valve (3) completely (turn left,
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman CXE-27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman CXE-27 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info