743390
4
Zoom out
Zoom in
Previous page
1/6
Next page
CABLE TESTER CT100
4
TEST TONE MODE may be used to check signal flow and to facilitate
level adjustments. It routes a test tone to the + pin (pin 2/tip) of all
OUT jacks. Use the TEST TONE LEVEL switch to choose between
+4 dBu, -10 dBV, or -50 dBV mic level. Please note that this mode is
not intended to work as a voltage standard and that battery voltage
will affect the test tone output level.
4.1 Selection between 1 kHz and 440 Hz
While in TEST TONE MODE, pressing RESET toggles between 1 kHz
and 440 Hz. The TEST TONE LED indicates the selected frequency:
On = 1 kHz, Off = 440 Hz.
5. PHANTOM POWER DETECT
In TEST TONE MODE, pins 2 and 3 are monitored for external DC
voltage (commonly supplied for condenser microphones). The
PHANTOM LEDs will light if DC voltage above approx. 9 V is detected.
6. WIRING
1/4", TT, 1/8" TRS connectors
(mono or TS connectors also work)
MIDI connector
(2 pins unused)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer CT100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer CT100 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer CT100

Behringer CT100 User Manual - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info