743390
2
Zoom out
Zoom in
Previous page
1/6
Next page
CABLE TESTER CT100
2
1. INTRODUCTION
Congratulations! With the CT100, you have purchased an indispen-
sable tool that enables you to easily check the most common cables
used by musicians and sound engineers. Faulty cables are a
common cause of failure in live and studio situations. This micro-
processor-controlled device was designed to ensure fast, reliable
problem location. Various test modes and the included belt clip add to
its flexibility.
2. CABLE TESTER MODE
+ Move the ON switch to the CABLE TESTER position.
Insert one end of your cable into any OUT jack of the CT100. Connect
the other end of the cable to any IN jack. The LEDs will indicate which
input pins are connected to each output pin. Additionally, the
GROUNDED SHIELD LED indicates whether a XLR OUT jacks shield
is connected to the pin 1/sleeve signal.
2.1 How to test intermittent connections
The following method allows you to detect intermittent connections
caused by wire breaks or faulty solder points. While in CABLE TESTER
MODE, press RESET to store the current cable-wiring display and to
clear the INTERMITTENT LEDs. Move the cable vigorously in all
directions and watch the LEDs. Any change in wiring or break in the
signal flow will cause the LED of the corresponding input pin to light
up. The LED will stay lit until RESET is pressed again, assuring
detection of even the shortest breaks in the signal flow. It is a good
idea to repeat the test after resetting the LEDs to double-check the
initial results.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Behringer CT100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Behringer CT100 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Behringer CT100

Behringer CT100 User Manual - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info