723111
4
Zoom out
Zoom in
Previous page
1/4
Next page
TROUBLESHOOTING
The washing machine may sometimes not work properly for certain reasons. Before calling the After-sales service, it is recommended to check to see if
the problem can be easily resolved using the following list. See also USER MANUAL for more information.
XXXXX
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website - docs.bauknecht.eu
Using QR Code
Alternatively, contact our After‑sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identication plate.
Anomalies: Possible causes / Solution:
The washing machine does not turn on
and/ or programme does not start
The plug is not inserted into the electrical outlet, or not enough to make contact.
There has been a power failure.
Lid is not properly closed.
The “Child lock function has been activated (if available).
The wash cycle does not start.
The “Start/Pause“ button has not been pressed.
The water tap is not open.
A “Start delay“ has been set.
Appliance stops during the
programme, and the
“Start/Pause“ light blinks
“Rinse hold“ option is activated (if available).
Programme has been changed - re-select desired programme and press “Start/Pause“ .
The appliance’s safety system has been activated (see USER MANUAL/ Description of failure
indicators).
Appliance vibrates
The washing machine is not level.
The transport bracket has not been removed; before using the washing machine, the transport
bracket must be removed.
Final spin results are poor. The laundry
is still very wet. “Spin/Drain“ indicator
blinks, or the spin speed on the display
blinks, or the spin speed indicator
blinks after the end of the programme
‑ depending on the model
Unbalance of the laundry load during spinning prevented the spin phase to avoid damages on
the washing machine. This is why the laundry is still very wet. Reason for unbalance can be:
small laundry loads (consisting of only few quite big or absorbent items, e.g. towels), or big/
heavy laundry items.
If possible avoid small laundry loads.
“Spin“ button has been set to a low spin speed.
The machine is indicating an error code
(e.g. F‑02, F‑..) and/or “Call Service“
indicator lights up
Shut o the machine, disconnect the plug from the outlet, and wait about 1 minute before
turning it back on.
Display only - Check the error code (e.g. F-02, F-..) in USER MANUAL for the possible solution.
If the problem persists, call the After-sales service.
“Water lter clogged“ indicator lights
up
Waste water is not pumped out.
Clean the water lter
For more info see USER MANUAL.
“No water“ indicator lights up
Appliance has no or insucient water supply.
For more info see USER MANUAL.
“Detergent over dosage indicator
lights up (if available)
The symbol will light up at the end of the programme if you used too much detergent.
Too much foam is formed.
The detergent is not compatible with the washing machine (it must bear the wording “for
washing machines“, “for hand washing and washing machines“, or something similar).
400011387444
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WAT 619 EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WAT 619 EX in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WAT 619 EX

Bauknecht WAT 619 EX User Manual - German - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info