Manual Bauknecht WAT 619 EX (page 3 of 4) (English)

723111

Zoom out

Zoom in

1/4

Spin (incl. Rinse hold ) / Schleudern / Spülstopp

Every programme has a predefined spin speed. Press the button to set

another spin speed. If you select spin speed “0” , the final spinning is

cancelled and the water is drained out only. However, intermediate spin

phases remain during the rinse.

If you select “Rinse hold” , the laundry remains in the last rinse water

without progressing to the final spin cycle, to avoid creasing and prevent

colours from changing. To activate the “Rinse hold” , press the “Spin/ Rinse

hold” button repeatedly until the “Rinse hold” symbol on the display

lights up. The wash programme stops to “Rinse hold” when the “Rinse

hold” symbol on the display blinks; the light of “Start/Pause” button also

blinks. To terminate the “Rinse hold” by spinning the laundry, press “Start/

Pause” - the laundry will be spun with the default spin speed. You can

also select another spin speed with the “Spin/ Rinse hold” button before

you start the spin cycle by pressing “Start/Pause” . To terminate the “Rinse

hold” by draining the water without spinning, press the “Spin/ Rinse hold”

button until spin speed “0” appears on the display; then press “Start/

Pause” to start the draining. Do not leave the laundry to soak for too long

in the “Rinse hold”

CHILD LOCK

You can lock the buttons of the control panel against improper use (e.g.

by children). Press both of the child lock buttons simultaneously and hold

them for at least 3 seconds. The key symbol on the display lights

up. To unlock the buttons again proceed in the same way.

BLEACHING

Wash your laundry in the desired programme, Cotton or Synthetics

, adding an appropriate amount of chlorine bleach to the Softener

chamber (close the lid carefully). Immediately after the end of

the programme, turn the “Programme selector” and start the desired

programme again to eliminate any residual bleach smell; if you want, you

can add softener. Never put both chlorine bleach and softener into the

softener chamber at the same time.

HINTS AND TIPS

Sort your laundry according to

Type of fabric/care label (cotton, mixed fifibres, synthetics, wool,

handwash items). Colour (separate coloured and white items, wash

new coloured items separately). Delicates (wash small items – like nylon

stockings – and items with hooks – like bras – in a cloth bag or pillow case

with zip).

Empty all pockets

Objects like coins or lighters can damage your laundry as well as the

drum.

Appliance interior

If you never or seldom wash your laundry at 95°C, we recommend to

occasionally run a 95°C programme without laundry, adding a small

amount of detergent, to keep the interior of the appliance clean.

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch off and unplug the washing

machine. Do not use flammable fluids to clean the washing machine.

Cleaning the outside of the washing machine

Use a soft damp cloth to clean the outer parts of the washing machine.

Do not use glass or general purpose cleaners, scouring powder or similar

to clean the control panel – these substances might damage the printing.

Detergent dispenser

Clean regularly, at least three or four times a year, to prevent detergent

build-up:

Press the release button  to release the detergent dispenser and

remove it. A small quantity of water can remain in the dispenser, thus you

should carry it in an upright position. Wash the dispenser using running

water. You can also remove the siphon cap on the back of the

dispenser for cleaning. Replace the siphon cap in the dispenser (if

removed) Reinstall the dispenser by locating the dispenser’s bottom tabs

into the appropriate openings on the lid, and by pushing the dispenser

against the lid until it locks into place. Make sure that the detergent

dispenser is correctly reinstalled.

Checking the water supply hose

Check the inlet hose regularly for brittleness and cracks. If damaged,

replace it by a new hose available through our After-Sales Service or

your specialist dealer. Depending on the hose type: If the inlet hose has

a transparent coating, periodically check if the colour intensifies locally.

If yes, the hose may have a leak and should be replaced. For water stop

hoses (If available): check the small safety valve inspection

window (see arrow). If it is red, the water stop function was triggered, and

the hose must be replaced by a new one. For unscrewing this hose, press

the release button (if available) while unscrewing the hose.

Cleaning the mesh filters in the water supply hose

Check and clean regularly (at least two or three times a year).

Close the tap and loosen the inlet hose on the tap. Clean the internal

mesh filter and screw the water inlet hose back onto the tap. Now

unscrew the inlet hose on the rear of the washing machine. Pull off the

mesh filter from the washing machine connection with universal pliers

and clean it. Refit the mesh filter and screw the inlet hose on again. Turn

on the tap and ensure that the connections are completely water-tight.

Cleaning the water filter / draining residual water

The washing machine is provided with a self-cleaning pump. The filter

keeps objects like buttons, coins, safetypins etc. which have been left in

the laundry. If you used a hot wash programme, wait until the water has

cooled down before draining any water. Clean the water filter regularly, to

avoid that the water cannot drain after the wash due to obstruction of the

filter. If the water cannot drain, the indicator indicates that the water filter

may be clogged.

Open the filter cover with a coin. Place a broad, flat container beneath

the water filter, to collect the drain water. Slowly turn the filter

counterclockwise until water flows out. Let the water flow out, without

removing the filter. When the container is full, close the water filter by

turning it in clockwise. Empty the container. Repeat this procedure until

all the water has drained. Lay a cotton cloth beneath the water filter,

which can absorb a small amount of rest water. Then remove the water

filter by turning it out anti clockwise. Clean the water filter (remove

residues in the filter and clean it under running water) and the filter

chamber. Make sure the pump impeller (in the housing behind the filter)

is not obstructed. Insert the water filter and close the filter cover: Reinsert

the water filter again by turning it in clockwise direction. Make sure to

turn it in as far as it goes. To test water tightness of the water filter, you

can pour about 1 liter of water into the drum and check that water does

not leak from the filter. Then close the filter cover.

Lid seal

Check the condition of the lid seal periodically and clean it from time to

time with a damp cloth.

Recovering an object that falls between the drum and the tub

If an object accidentally falls between the drum and the tub, you can

recover it thanks to one of the removable drum lifters.

Unplug the washing machine. Remove the laundry from the drum. Close

the drum flaps and turn the drum a half-turn (picture a). Using a screw-

driver press on the plastic end, while sliding the lifter from left to right

(picture b, c) by hand it will fall into the drum. Open the drum. You can

recover the object through the hole in the drum. Refit the lifter from

inside the drum: Position the plastic tip above the hole on the right side

of the drum (picture d). Then slide the plastic lifter from right to left until

it clips. Close the drum flaps again, turn the drum through half a turn and

check the positioning of the blade at all its anchorage points. Plug the

washing machine in again.

TRANSPORT AND HANDLING

Pull out the mains plug, and close the water tap. Disconnect the inlet

hose from the water tap, and remove the drain hose from your draining

point. Remove all rest water from the hoses and washing machine and

fix hoses so that they cannot get damaged during transport. To facilitate

moving the machine, pull the mobility lever situated at the bottom

front (if available on your model) out a little by hand. Pull the washing

machine out to the stop with the foot. Afterwards push the mobility lever

back into the original stable position. Refit the transport bracket. Follow

the instructions for removing the transport bracket in the INSTALATION

GUIDE in reverse order.

Quick guide

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WAT 619 EX in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WAT 619 EX

Bauknecht WAT 619 EX User Manual - German - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bauknecht WAT 619 EX Manual

Product: