53661
2
Zoom out
Zoom in
Previous page
1/14
Next page
19
BEFORE USING THE WASHING MACHINE
1. Remove the packaging and check
After unpacking, make sure that the washing
machine is undamaged. If in doubt, do not use the
washing machine. Contact After-Sales Service or
your local retailer
Check that the accessories and supplied parts are all
present
Keep the packing material (plastic bags, polystyrene
parts, etc.) out of reach of children, as they are
potentially dangerous
2. Remove the transport bolts
The washing machine is fitted with a transport bolts
to avoid any possible damage to the interior during
transport. Before using the washing machine, it is
imperative that the transport bolts are removed
3. Install the washing machine
Remove the protective foil from the control panel
Move the appliance without lifting it by the worktop
Install the appliance on a solid and level floor
surface, preferably in a corner of the room
Make sure that all four feet are resting firmly on the
floor and check that the appliance is perfectly level
(use a spirit level)
4. Water inlet
Connect the water supply inlet hose in accordance
with regulations of your local water company
5. Drain hose
Connect the drain hose to the siphon or hook it
over the edge of a sink by means of the “U” bend
supplied
If the washing machine is connected to a built-in
pumping out system, ensure that the latter is
equipped with a vent to avoid simultaneous loading
and draining of water (siphoning effect)
6. Electrical connections
Electrical connections must be carried out by a
qualified technician in compliance with the
manufacturer’s instructions and local safety
regulations
Data concerning voltage, consumption and fuses are
located on the inside of the appliance door
The appliance must be connected to the mains
exclusively by means of a socket with an earth
connection in accordance with established
regulations. The washing machine must be earthed
by law. The manufacturer declines all liability for
damage to property or injury to persons or animals
due to non-compliance with the directions given
above
Do not use extension leads or multi sockets
Before any maintenance on the washing machine
disconnect it from the mains supply
Access to the mains plug or to disconnection from
mains supply via a double-pole switch must be
ensured at all times following the installation
Do not operate the washing machine if it has been
damaged during transport. Inform the After-Sales
Service
Mains cable replacement is only to be carried out by
After-Sales Service
The washing machine must only be used in the
household for the prescribed uses
Minimum housing dimensions:
Width: 600 mm
Height: 825 mm
Depth: 600 mm
Water inlet: Cold water only
Tap: 3/4” threaded hose connection
Water pressure
(flow pressure):
100-1000 kPa (1-10 bar)
40105150aGB.fm Page 19 Wednesday, November 17, 2004 4:59 PM
Black process 45.0° 100.0 LPI
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WAK1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WAK1600 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WAK1600

Bauknecht WAK1600 User Manual - German - 60 pages

Bauknecht WAK1600 User Manual - Dutch - 12 pages

Bauknecht WAK1600 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info