53661
12
Zoom out
Zoom in
Previous page
1/14
Next page
29
b.Draining failure
Waste water not pumped out.
For models with a failure display, the spin speed
indication LEDs flash. If a digital display is fitted, “P
” and
“F
” are also displayed alternately.
For models with LCD Display, the following notice
appears:
For models with no failure display, the washing machine
stops in the appropriate programme step.
Switch the appliance off and pull out the mains plug.
Check whether:
The drain hose is kinked
The pump or the foreign body trap is blocked (see
“Removing The Filter”)
IMPORTANT:
Before draining, make sure that the
water has cooled down.
The water in the drain hose is frozen up
Reconnect the appliance to the electrical socket.
For models with failure display, select and start the
“Drain/Cancel” programme.
For models without a failure display continue the
programme by pressing the “On/Off” button again.
If the failure occurs again, please contact After Sales
Service (see “After-Sales Service”).
c. Failure in an electrical component
The appliance stops in the middle of a programme.
If a digital display or LCD is fitted, “F4
” to “F31” will
also be displayed.
First of all select and start the “Drain” or “Drain/
Cancel” programme.
Then select and start the desired programme again.
For models with no failure display, the washing machine
stops in the appropriate programme step.
Switch the washing machine off and on again to
continue with the programme.
If the failure occurs again, please contact After Sales
Service (see “After-Sales Service”).
d.“Water Stop” failure
(if fitted)
The “Water Stop” failure may have been triggered by:
1.
excess foaming.
2.
A leak in the washing machine.
In this case the pump is switched on automatically in
order to pump the water out.
For models with a failure display, the “Water Stop”
indication flashes and the spin speed indicator LEDs
flash. If a digital display is fitted, “A
” and “F” are also
displayed alternately.
If the washing machine has an LCD, this notice appears:
Water Stop Failure
For models with no failure display, the washing machine
stops in the appropriate programme step.
Switch the appliance off, pull out the mains plug and
turn the water tap off.
Tilt the appliance forwards carefully to allow the
collected water to flow out from the bottom of the
appliance.
Then:
1.
Connect the appliance to the electrical supply.
2.
Turn the water tap on (if water immediately flows
into the appliance again, without the appliance being
started, there is a failure. Turn off the tap and notify
After Sales Service).
3.
For models with failure display, select and start the
desired programme again.
If the failure occurs again, please contact After Sales
Service (see “After-Sales Service”).
“Water Stop” failure when the programme
selector switch marking is on top (“Off” position).
The pump is switched on automatically in order to
pump the water out.
For models with failure display the washing machine
will also detect a Water Stop failure (leak) if the
programme selector is in the “Off” position.
In this case the digital display (if fitted) alternately shows
“A
” and “F”.
The LCD (if fitted) shows this notice:
Water Stop failure
For models with no failure display, the “Water Stop”
failure is detected when the appliance is switched on
again.
Pull the mains plug out and ensure that the water tap is
turned off.
Tilt the appliance forwards carefully to allow the
collected water to flow out.
Then:
1.
Connect the appliance to the electrical supply.
2.
Turn the water tap on (if water immediately flows
into the appliance again, without the appliance being
started, there is a failure. Turn off the tap and notify
After Sales Service).
40105150aGB.fm Page 29 Wednesday, November 17, 2004 4:59 PM
Black process 45.0° 100.0 LPI
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bauknecht WAK1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht WAK1600 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht WAK1600

Bauknecht WAK1600 User Manual - German - 60 pages

Bauknecht WAK1600 User Manual - Dutch - 12 pages

Bauknecht WAK1600 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info