Manual Bauknecht Super Eco 6413 (page 3 of 4) (English)

662959

Zoom out

Zoom in

1/4

5019 400 00360

Load the laundry, close the door and turn the

programme selector to the desired

programme; the “Start/Pause” indicator

will flash. The temperature and spin speed

shown on the display can be changed by

pressing the “Temperature” or “Spin”

buttons. If you do not use the dosage aid

indicator: load the detergent according to

the information on the first page and in the

Instructions for Use.

If a particular programme and additional

function(s) combination is not possible, the

indicator will switch off automatically.

Impossible combinations of options are

automatically deselected.

“Prewash” button

• Adds a prewash to the selected wash

programme and increases the duration of

the programme by about 15 minutes.

CONSUMPTION

DATA

Energy consumption when in off-mode 0.16 W / in left-on condition 0.16 W

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. programme duration

(hours: minutes)

without “Rapid” without “Rapid”

Mixed 40 4.0 48 0.50 1:00 —

Hot wash 95 6.0 59** 2.00 2:30 —

Colour 60 6.0 49 1.02 2:20 1:35

Colour 40 6.0 57 0.70 2:05 1:15

Easy care 60 3.0 46** 0.90 1:35 1:10

Easy care 40 3.0 42 0.50 1:20 0:55

Delicates 40 1.5 60 0.65 0:50 —

Wool/Handwash 40 1.0 45 0.55 0:40 —

Whites 40 6.0 59 0.75 2:20 —

Light colours 40 4.0 60 0.45 1:20 —

Dark colours 40 4.0 40 0.55 1:40 1:15

Cotton *

60 6.0 49 0.70 4:00 —

Cotton *

60 3.0 36 0.55 2:30*** —

Cotton *

40 3.0 36 0.50 2:30*** —

Aqua Eco 40 3.0 19 0.45 1:00 —

Short 15’ 30 3.0 25 0.15 0:15 —

Jeans 40 4.0 52 0.50 1:30 1:10

Consumption values were measured in normal conditions in compliance with standard IEC/EN 60456.

They may vary in the home depending on the individual water supply pressure and temperature, the

load and the type of wash. The consumption values provided are based on a water supply temperature

of approximately 15°C.

Water and energy consumption values are based on the programme default settings at the

temperatures and with the loads specified in the table. Selecting any options or changing the spin

speed will also change the consumption values.

The programme duration may differ from the values indicated above as they are affected by the

operating conditions (see also “Troubleshooting Guide” in your Instructions for Use).

** To reduce the water temperature, cold water is added at the end of the main wash cycle before the

water is drained.

*** Automatic adaptation of programme duration after detection of wash load.

* Energy Label reference programme. For energy saving reasons, the actual water temperature can

differ from the specified temperature.

MACHINE LOADING AND

PROGRAMME SELECTION

SELECT DESIRED OPTIONS

• For heavily soiled laundry (e.g. containing

sand or granular dirt).

• Do not use liquid detergent for the main

wash when using the “Prewash” option.

“Intensive rinse” button

• Increases the amount of water added and

prolongs the rinse cycle.

• This option is particularly suitable for areas

with very soft water or for washing baby

garments, and is useful for people with an

allergy to detergents.

“Soil level” button

• Adapts the programme duration to the soil

level of your laundry. Also influences the

detergent dosing aid recommendation

when using the “Dosing Aid” button.

= lightly soiled - = normally soiled -

= heavily soiled

Not all soil levels can be selected with each

programme.

“Colours 15°” button

• Provides environmentally friendly washing

by saving the energy used to heat water.

• This option keeps colours brighter for

longer; this has been confirmed by the

German Cleaning Technology Institute

(the “wfk”).

• Recommended for lightly soiled laundry

without stains.

• Make sure that your detergent is suitable

for cold wash temperatures (15 or 20°C).

• Not selectable for cotton programmes

70 - 95°C.

“Rapid” button

• Speeds up washing by shortening the

programme duration.

• Only recommended for lightly soiled

laundry.

• Not selectable for cotton programmes

70 - 95°C.

“Spin” button (incl. “Rinse hold” )

• Every programme has a predefined spin

speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spin

will be cancelled and the water will drain

out only. However, intermediate spin

phases remain during the rinse.

• If you select “Rinse hold” , the laundry

remains in the last rinse water without

progressing to the final spin cycle; this

avoids creasing and prevents colours from

running. To activate “Rinse hold”, press

the “Spin” button repeatedly until the

“Rinse hold” symbol on the display

lights up.

• The wash programme is in “Rinse hold”

mode when the “Rinse hold” symbol

on the display flashes; the “Start/Pause”

indicator flashes as well.

• To end “Rinse hold” by spinning the

laundry: press the “Start/Pause” button -

the laundry will be spun at the default spin

speed. You can also select another spin

speed using the “Spin” button before you

start the spin cycle with “Start/Pause”.

• To end “Rinse hold” by draining without

spinning: press the “Spin” button until

spin speed “0” appears on the display;

then press “Start/Pause” to start the

draining process.

• When using the “Rinse hold” option, do

not leave the laundry to soak for too long

in the spin water (especially silk).

- the sensor technology adapts water and energy consumption as well as the programme duration based on the load quantity

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht Super Eco 6413 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht Super Eco 6413

Bauknecht Super Eco 6413 Additional guide - English - 4 pages

Bauknecht Super Eco 6413 Additional guide - German - 4 pages

Bauknecht Super Eco 6413 User Manual - German - 4 pages

Bauknecht Super Eco 6413 Installation Guide - German, Dutch - 12 pages

Bauknecht Super Eco 6413 Additional guide - Dutch - 4 pages

Bauknecht Super Eco 6413 User Manual - Dutch - 4 pages

Bauknecht Super Eco 6413 Installation Guide - French, Italian - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bauknecht Super Eco 6413 Manual

Product: