Manual Baratza Vario-W (page 9 of 15) (English)

541813

Zoom out

Zoom in

1/15

Sleep Mode

To minimize standby power con-

sumption, the VARIO-W

will go

into “sleep mode” automatically af-

ter 5 minutes of non-use. While in

sleep mode, the LCD display goes

blank. To “wake up” your Vario-W

simply press any button.

Burr Calibration

of the VARIO-W

A 2mm allen head calibration

screw is located in the round hole

behind the discharge chute (see

photo at right). This calibration

screw allows the user to easily ad-

just the calibration in the ner or

coarser direction while the grinder

is running.

To make the adjustment, empty all

beans from the grinder, lower the

Macro and Micro levers all the way

to the bottom and run it briey to

expel any partially ground coffee.

With the bin removed, TARE the

grinder. Now press any of the pre-

set buttons and press START. The

grinder will run until you press the

START button again or 3 minutes

elapses. While the grinder is run-

ning, raise the Macro arm all the

way to the top (Espresso). You

should not hear any change in mo-

tor speed. Now raise the Micro arm

up to the midpoint. You should be-

gin to hear the motor slow or labor

a little (you can hear the sound on

YouTube, “baratza Vario calibra-

tion”). If you do not hear the motor

labor or would like your VARIO-W

to be calibrated ner, use the spe-

cial Vario tool provided with your

grinder (see photo below). Insert

the tool and turn in the ner direc-

tion (counter clockwise) until you

begin to hear the motor slow or la-

bor. If you would like to calibrate

your VARIO-W

courser, insert the

tool and turn clockwise (opposite

direction of the arrow on the tool).

If you do not have a tool you can

substitute a 2mm Allen wrench and

turn clock wise while looking from

the base of the grinder up.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baratza Vario-W in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baratza Vario-W Manual

Product: