559269
36
Zoom out
Zoom in
Previous page
1/37
Next page
6 Konfiguration der FRITZ!Card
36
6SETTING THE I/O ADDRESS ON FRITZ!CARD
A permanent I/O area (I/O address) and an interrupt must be
assigned to FRITZ!Card in the PC in order to enable it to be
managed. The I/O area is both set directly on the card and also
specified in the software. The interrupt is entered only in the
software. The time at which these settings are required depends
on the installation procedure in the operating system in ques-
tion and is described in Chapter 3 How to Install Fritz!Card.
For how to enter the interrupt and the I/O area in the software and
how to change this entry, see Chapter 3 How to Install Fritz!Card.
Before delivery, the hardware and software of FRITZ!Card are
set up in such a way that problem-free operation is to be ex-
pected. FRITZ!Card is set to the I/O area (I/O address) 300 and
the interrupt 5. If these values are already being used by an-
other plug-in card, it is necessary for you to set a new I/O area
and interrupt. Owners of sound cards should note that these
cards often use interrupt 5.
The I/O area (I/O address) on FRITZ!Card is set by positioning
a so-called jumper. Each position of the jumper corresponds to
a certain I/O area (I/O address). The corresponding I/O ad-
dresses are printed on the card alongside the row of jumpers.
To set a new I/O area (I/O address), proceed as follows:
1. Hold FRITZ!Card with the component side upwards and
turn the FRITZ!Card connections to the right.
The following illustration shows the jumper position set
for the I/O area (I/O address) 300 at delivery time.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM FRITZ Card Classic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM FRITZ Card Classic in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM FRITZ Card Classic

AVM FRITZ Card Classic Usermanual and installation guide - German - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info