165835
8
Zoom out
Zoom in
Previous page
1/12
Next page
8
ITALIANO
DATI TECNICI
ALIMENTAZIONE 11 ÷ 15 VDC
ASSORBIMENTO A VUOTO 1 A
ASSORBIMENTO MAX (Pot. Nominale) 26 A
MAX DYNAMIC POWER (4 ch x 4 Ohm) 60 W
MAX DYNAMIC POWER (3 ch x 4 Ohm) Sub 60 + 60 + 180 W
POTENZA NOMINALE CONT. (Toll. +10 %; -5 %)
4 Ch x 4 Ohm; 0,3 % THD; 12 VDC 40 W (RMS)
POTENZA OUT CONTINUA (4 Ch x 4 Ohm; 13,8 VDC) 45 W (RMS)
POTENZA OUT CONTINUA (4 Ch x 2 Ohm; 13,8 VDC) 65 W (RMS)
POTENZA OUT MONO (2 Ch x 4 Ohm; 13,8 VDC) Bridge 130 W (RMS)
POTENZA OUT CONTINUA (3 Ch x 4 Ohm; 13,8 VDC) 45 + 45 + 130 W
DISTORSIONE THD (1 KHz; 90 % Pot. Nominale) 0,07 %
BANDA PASSANTE (-3 dB; Pot. Nominale) 4 Hz ÷ 100 KHz
FREQUENZA DI CROSSOVER 48 ÷ 4800 Hz
PENDENZA FILTRI 12 dB/Ott.
FATTORE DI SMORZAMENTO (4Ohm) 120
TEMPO DI SALITA 4,5 µS
RAPPORTO SEGNALE RUMORE 98 dBA
SENSIBILITA' D'INGRESSO 0,3 V ÷ 4 VRMS
IMPEDENZA D'INGRESSO 15 KOhm
IMPEDENZA DI CARICO Stereo 8 - 4 - 2 Ohm
IMPEDENZA DI CARICO Mono 8 - 4 Ohm
REMOTE IN 7 ÷ 15 VDC
DIMENSIONI (BxAxL) 175 x 50 x 330 mm
ENGLISH
TECHNICAL DATA
POWER SUPPLY 11 ÷ 15 VDC
IDLING CURRENT 1 A
MAX COMSUMPTION (Nominal Pwr) 26 A
MAX DYNAMIC POWER (4 ch x 4 Ohms) 60 W
MAX DYNAMIC POWER (3 ch x 4 Ohms) Sub 60 + 60 + 180 W
CONT. NOMINAL POWER (Tol. +10 %; -5 %)
4 Ch x 4 Ohms; 0.3 % THD; 12 VDC 40 W (RMS)
CONT. OUT POWER (4 Ch x 4 Ohms; 13.8 VDC) 45 W (RMS)
CONT. OUT POWER (4 Ch x 2 Ohms; 13.8 VDC) 65 W (RMS)
MONO OUT POWER (2 Ch x 4 Ohms; 13.8 VDC) Bridge 130 W (RMS)
CONT. OUT POWER (3 Ch x 4 Ohms; 13.8 VDC) 45 + 45 + 130 W
DISTORTION THD (1 KHz; 90 % Nominal Pwr) 0.07 %
BANDWIDTH (-3 dB; Nominal Pwr) 4 Hz ÷ 100 KHz
CROSSOVER FREQUENCY 48 ÷ 4800 Hz
FILTER SLOPE 12 dB/Oct.
DAMPING FACTOR (4 Ohms) 120
RISE TIME 4.5 µS
SIGNAL / NOISE RATIO 98 dBA
INPUT SENSITIVITY 0.3 V ÷ 4 VRMS
INPUT IMPEDANCE 15 KOhms
LOAD IMPEDANCE Stereo 8 - 4 - 2 Ohms
LOAD IMPEDANCE Mono 8 - 4 Ohms
REMOTE IN 7 ÷ 15 VDC
DIMENSIONS (BxHxL) 175 x 50 x 330 mm (6.88 x 1.96 x 12.99 inch)
17
POWER
Eingangsklemmen für die
Stromversorgung des
Verstärkers.Verbinden Sie
das Plus-und Massekabel
(Minus) mit den
korrespondierenden
Klemmen am Verstärker.
Die angelegte Spannung
muß zwischen 11 und 15
Volt betragen.
ANSCHLUßKONFIGURATION
CH A/HI-PASS
Linker und rechter
Leistungsausgang für die
A-Kanäle (Frequenzweiche
ausgeschaltet) oder
Ausgänge für den linken und
rechten Hochpaßausgang
(Frequenzweiche
eingeschaltet).
Mit ausgeschalteter
Weiche geben diese
Kanäle den vollen
Frequenzbereich wieder,
mit eingeschalteter Weiche
den Hochpaßanteil
(einstellbar 48 - 4800 Hz).
CH B/LO-PASS
Linker und rechter
Leistungsausgang für die B-
Kanäle (Frequenzweiche
ausgeschaltet) oder
Ausgänge für den linkenund
rechten LO-PASS-Ausgang
(Frequenzweiche
eingeschaltet).
Mit ausgeschalteter Weiche
geben diese Kanäle den
vollen Frequenzbereich
wieder, mit eingeschalteter
Weiche den Tiefpaßanteil
(einstellbar 48 - 4800 Hz).
MONO
Ausgänge für Mono-
Brückenschaltung, werden
benutzt, wenn die A-Kanäle
(deaktivierte
Frequenzweiche) oder die
HI-PASS-Kanäle (aktivierte
Frequenzweiche) mit dem
Schalter auf der Front des
Verstärkers auf MONO IN
R geschaltet werden.
MONO
Ausgänge für Mono-
Brückenschaltung, werden
benutzt, wenn die B-Kanäle
(deaktivierte
Frequenzweiche) oder die
LO-PASS-Kanäle (aktivierte
Frequenzweiche) mit dem
Schalter auf der Front des
Verstärkers auf MIX MONO
geschaltet werden.
AUSGANGSKLEMMEN
STROMVERSORGUNG
IN
Anschluß für
Schaltspannung
zum Einschalten
des Verstärkers,
kommt vom
Autoradio (oder
von einem
anderen Gerät,
das ebenfalls
über eine
Schaltspannung
für Verstärker
verfügt). Die
Schaltspannung
muß zwischen 7
und 15 Volt
Gleichspannung
betragen.
REMOTE
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audison power 4 millennium at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audison power 4 millennium in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info