Categories
121882

ATAG Cafemax Manual

67
Zoom out
Zoom in
Previous page
1/93
Next page
YOUR COFFEE MACHINE
6 Maintenance
GB 23
e two red buttons are º not snapped out (fi g. 30).
Notes
If the brewing unit is not put in place correctly, i.e. if it can be •
heard clicking into position and the red buttons are not properly
snapped back out, the service door cannot be closed.
If the brewing unit can only be put into place with diffi culty, it •
must be made into the right height (before inserting) by pressing
the brewing unit fi rmly together from top and bottom (fi g. 31).
If it is still diffi cult to insert the brewing unit: •
Leave it out of the appliance, place the drip tray, close the º
service door, switch the the main switch on the back of the
appliance to 0 and then to l again.
Wait for all the lights to go off , then open the door, remove º
the drip tray and replace the brewing unit.
Replace the drip tray, complete with the grounds container. º
Close the service door. º
6.1.3 Cleaning the nozzles and the milk container
Every time after heating milk or making cappuccino, the nozzles on
the milk container have to be cleaned (see 5.2.11 on page 19). Also
the milk container has to be cleaned regularly.
Unfasten the lid of the milk container with a slight clockwise turn 1.
and remove it.
Pull off the suction pipe (fi g. 32).2.
Pull off the milk dispenser pipe and the slider on the lid (fi g. 33).3.
Carefully clean all the parts with hot water and detergent.4.
e parts of the milk container must not be cleaned in the
dishwasher!
30
31
32
1 CAPPUCCINO
2 CAFFELATTE
33
YOUR COFFEE MACHINE
6 Maintenance
GB 22
Carefully clean the inside of the machine. Scrape off the encrusted 5.
coff ee in the coff ee machine using a wooden or plastic fork or
something similar that will not scratch the fi nish (fi g. 26).
Remove all the remains with a vacuum cleaner (fi g. 27).6.
Replace the brewing unit (A) by pushing it into the holder (B) 7.
and the pin (C).  e pin must be introduced into the tube (D)
at the bottom of the brewing unit. Now push fi rmly where it says
PUSH (E) until the brewing unit is heard fastening into place
(fi g. 28).
Once you have heard the unit clicking into position, make sure 8.
that the red buttons have snapped back out, otherwise the service
door cannot be closed.
e two red buttons are º correctly snapped out (fi g. 29).
A
E
B
C
D
26
27
28
29
… 67 …

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG Cafemax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG Cafemax in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info