532085
81
Zoom out
Zoom in
Previous page
1/116
Next page
Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 80
Fwd/Trans to Outside Line
You can enable or disable the ability of each Deskset to forward or transfer a call to an
outside line. These features use two of your telephone lines. This function is enabled by
default. Disabling this function prohibits the user from sending a call to an outside line
via the Gateway.
To enable or disable Forward/Transfer to an outside line:
1. On the Admin Settings menu, press 2 to display the Forward/Transfer to line
screen.
2. Press
or to select Enabled or Disabled.
3. Press to accept the changes and return to the Admin Settings menu.
IP Settings
On the IP Settings menu, you can manually configure the Deskset IP address. See
“Appendix B: IP Addresses and Connectivity” on page 104 for a discussion of the Syn248
network configuration and IP settings.
To display the IP Settings screen:
1. On the Admin Settings menu, press 3 to display the IP Settings screen.
2. Perform one of the following:
a. Press 1 to select IP Configuration. See “To set the IP Configuration:” on
page 81.
b. Press 2 to select Set/Edit Static IP. See “To set and edit static IP Address:” on
page 81.
c. Press 3 to select IP Status. See “To view the IP status:” on page 81.
Forw ard / Transfer
Fw d/Trans to Outside Line:
Enabled
Save
Save
If Intercom Call Forward–No Answer is set to Phone#, disabling
Fwd/Transfer to Outside Line causes a warning message to appear,
warning you that Call Forward–No Answer is set to OFF. You may want to
select a new target for the Intercom Call Forward–No Answer setting.
IP Settings
1. IP Configuration
2. Set/Edit Static IP
3. IP Status
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T SYN 248 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T SYN 248 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info