628507
2
Zoom out
Zoom in
Previous page
1/3
Next page
Application Note: 121 EF1210TEC Addendum
ASPI Digital - The Sound of DSP 2
Generating Mix Minus with the EF1210TEC
A system using an EF1210TEC can be configured to generate a mix minus. This may be nec-
essary if the system is used with a bridge or MCU that does not have mix minus. That is, if the
bridge sends the local site’s audio back to itself. When the EF1210 is used in this type of
application, it will remove its own audio from the incoming signal, while allowing audio from
other sites to come through.
To generate a mix minus, send the mix of all transmitted audio (including all local micro-
phones) to the TEC Reference input. Then connect the To CODEC output to the video codec.
This will send local audio to the remote sites, and give the TEC a reference. Bring the output
of the video codec into the TEC Input. The TEC will cancel any delayed echo from the codec
signal and pass it on to the TEC Out. This can be sent to the AEC Reference (this signal now
contains audio from the remote sites) and out into the room. The other AEC channels will use
this reference to prevent acoustic echo from being sent back out onto the network.
Using the EF1210TEC in High/Low Delay Applications
In some applications, the signal from another site may arrive from two different paths with dif-
ferent delays. This is not a typical echo problem in which local talkers hear themselves return
through the system. Rather, they will hear talkers from another site twice, possibly separated
by several hundred milliseconds. This may occur if some sites are communicating with each
other over wide bandwidth connections, and also with a larger number of sites on a low band-
width bridge. The high bandwidth sites may communicate with each other over both the wide
bandwidth and narrow bandwidth networks. Figure 2b shows how this type of system may be
connected.
Figure 2a: Mix Minus Configuration Figure 2b: High/Low Delay Configuration
8-channel
Automixer
In 1
In 2
In 3
In 4
In 5
In 6
In 7
In 8
Direct Out 1
Direct Out 2
Direct Out 3
Direct Out 4
Direct Out 5
Direct Out 6
Direct Out 7
Direct Out 8
Aux Master Out
EF1210TEC
TEC Input
In 2
In 3
In 4
In 5
In 6
In 7
In 8
TEC Out
Out 2
Out 3
Out 4
Out 5
Out 6
Out 7
Out 8
AEC Ref
TEC Ref
To CODEC
Room Audio
Amix In
Record
To TEC Ref
Pla
y
Video
CODEC
Line In Line Out
EF1210TEC
TEC Input
In 2
In 3
In 4
In 5
In 6
In 7
In 8
TEC Out
Out 2
Out 3
Out 4
Out 5
Out 6
Out 7
Out 8
AEC Ref
TEC Ref
To CODEC
Room Audio
Amix In
Record
To TEC Ref
Pla
y
8-channel
Automixer
In 1
In 2
In 3
In 4
In 5
In 6
In 7
In 8
Direct Out 1
Direct Out 2
Direct Out 3
Direct Out 4
Direct Out 5
Direct Out 6
Direct Out 7
Direct Out 8
Aux Master Out
Low Delay
Video CODEC
Line In Line Out
Hi
g
h Delay
Video CODEC
Line In Line Out
Line Mixer
In 1
In 2
Master Out
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aspi EF1210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aspi EF1210 in the language / languages: English as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Aspi EF1210

Aspi EF1210 User Manual - English - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info