637173
2
Zoom out
Zoom in
Previous page
1/10
Next page
sure the rubber O-ring does not get pinched or distort-
ed, as this will compromise the unit’s watertight seal.
Note: During a battery change programmed settings
and odometer mileage will be erased. Make a note of
your current wheel size setting and cumulative odometer
mileage before replacing the battery so you can repro-
gram these values after the battery change (see
“Programming Wheel Size” and “Setting the Odometer”).
STEP 4
If for some reason the screen is blank or shows an
irregular display after a battery change, remove the
battery and install again, which will restart the com-
puter’s microprocessor.
TRANSMITTER
The 4LW transmitter uses a
12V A23 battery.
STEP 1
To replace the battery, remove
the battery cap from the top of
the transmitter case using a
small coin. Remove the old bat-
tery and dispose of properly.
STEP 2
Install a new battery with the
positive (+) pole facing the cap.
Reinstall the battery cap and
tighten firmly, making sure that
the rubber O-ring does not get
pinched or distorted, as this will
compromise the unit’s water-
tight seal.
BUTTON FUNCTION
LEFT BUTTON
Press and hold the left button to reset the Display
Screens.
RIGHT BUTTON
Press the right button to toggle between the two
Display Screens.
FIGURE 1
CR2032
A23
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ascent 4LW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ascent 4LW in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info