637173
10
Zoom out
Zoom in
Previous page
1/10
Next page
STEP 2
Attach the wheel magnet loosely to one of the spokes
on the same side of the wheel as the transmitter.
Adjust the position of the magnet and transmitter by
sliding both pieces up or down until the magnet pass-
es the alignment mark on the transmitter with a clear-
ance of 1-3mm (1mm is about the thickness of a
penny). See Figure 6. If the magnet and transmitter
are not close enough, computer readings will be
inconsistent, erratic or completely absent. Most prob-
lems that occur when installing a new computer are
related to magnet and sensor alignment and spacing.
STEP 3
Once the transmitter and wheel magnet are aligned
properly, securely tighten both in place.
TEST OF INSTALLATION
Once the installation procedure is complete, test the
unit to make sure everything is adjusted and working
properly.
STEP 1
Pick up the front end of the bicycle and spin the front
wheel. The computer should register a speed reading
within 1-2 seconds. If it does not, check the alignment
of the wheel magnet and transmitter, and make sure
that the space between the magnet and transmitter is
3mm or less. Adjust as necessary and re-test.
Note: Wireless cyclocomputers are occasionally
affected by electromagnetic interference. Common
sources of electromagnetic signals include high volt-
age power lines, motor driven equipment and other
wireless devices (such as heart rate monitors). If you
experience unusually high speed readings, check
your surroundings for possible sources of electro-
magnetic signals and move away from the source.
Made in China, V.1 – April 2004
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ascent 4LW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ascent 4LW in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info