642232
7
Zoom out
Zoom in
Previous page
1/10
Next page
www.argonaudio.com 7
TT- 2
Anti-skating force adjustment
The anti-skating force must be adjusted according to the mass of the cartridge as follows:
Downforce Groove in the stub (8)
10 - 15mN 1
st
from bearing rings
15 - 20mN 2
nd
" " "
20mN and bigger 3
rd
" " "
Slip the loop of the anti-skating weight's thread over the second groove of the stub to set the correct anti-skating force for the
factory-fitted cartridge. Feed the thread through the loop of the wire support (10).
Connection to the amplifier
The Argon Audio TT2 has a captive tonearm signal lead (12) for connection to the amplifier. Use the Phono input (sometimes labelled
gram, disc or RIAA) on your amplifier. Make sure that the phono input offers correct matching and amplification for the type of cartridge
used. Line inputs (such as CD, Tuner, Tape or Video) are not suitable.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the left channel black or white.
Check the manual supplied with your amplifier for relevant information. The earthing wire of the tonearm lead should be connected
to the earth terminal on your amplifier (if provided).
If your amplifier does not have an input suitable for phono cartridges you will require a separate phono amplifier stage for MM or
MC cartridges such as the PRO-JECT PHONO BOX, the NAD RIAA AMP or the CAMBRIDGE RIAA AMP, which is then connected
between the record player and a free line level input of the amplifier.
NOTICE. Argon Audio TT2 USB version has build in RIAA AMP
The recommended load resistance for the factory fitted cartridge is: 47kohms/MM-input
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon TT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon TT2 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon TT2

Argon TT2 User Manual - German - 11 pages

Argon TT2 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info