642232
6
Zoom out
Zoom in
Previous page
1/10
Next page
www.argonaudio.com 6
TT- 2
Setup and usage
In order to achieve maximum performance and reliability with this record player you should study these instructions for use
carefully.
The Argon Audio TT2 record player is supplied with a factory fitted and adjusted cartridge.
During assembly and adjustment of the deck, small parts could be lost if not carefully placed in a suitable receptacle.
Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered in the technical
drawings above.
Set-up
Make sure the surface you wish to use the turntable on is level (use a spirit level) before placing the turntable on it.
Fit the drive belt (2/22) around the hub (2/22) and the smaller diameter part of the motor pulley (2/22). Avoid getting sweat or
grease on the belt as these will deteriorate the performance and reduce the belt's lifespan. Use absorbent kitchen paper to
remove any oil or grease from the outer edge of the hub and the belt. Fit the platter (3) and felt mat over the spindle of the hub
(2/22).
Cartridge down force adjustment
Adjusting the down force and anti-skating if you are not familiar with it can be complicated. We recommend that you watch the
following video for your convenience.
YouTube video for adjusting down force and anti skating on a turntable (click here).
The counterweight (4) supplied is suitable for cartridges weighing between 3,5 - 5,5g. An alternative counterweight for cartridges
weighing between 6 - 9g is available as an accessory part. Adjust the down force prior to installing the anti-skating weight.
Gently push and turn the counterweight (4) onto the arm tube stub. Lower the arm lift and position the cartridge in the space between
arm rest and platter. Carefully rotate the counterweight (4) until the arm tube balances out. The arm should return to the balanced
position if it is moved up or down. This adjustment must be done carefully. Do not forget to remove the cartridge protection cap if
fitted.
Once the arm is correctly balanced return it to the rest. Hold the counterweight (4) without moving it, and gently revolve the down
force scale ring (4a) until the zero is in line with the anti-skating prong (8). Check whether the arm still balances out.
Rotate the counterweight counter clockwise (seen from the front) to adjust the down force according to the cartridge
manufacturer's recommendations.
One mark on the scale represents 1 mN (= 0,1g / 0,1 Pond) of downforce.
The recommended downforce for the factory fitted cartridge is 17,5mN
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon TT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon TT2 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argon TT2

Argon TT2 User Manual - German - 11 pages

Argon TT2 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info