642215
9
Zoom out
Zoom in
Previous page
1/10
Next page
w w w . a r g o n a u d i o . c o m 9
DA2
Basic Troubleshooting
If the LED does not light up, check...
that the AC power cord is firmly plugged into the rear panel
and wall outlet.
to make sure the amplifier rear panel power switch is ON.
that the amplifier is getting power from the wall outlet.
that the rear panel voltage selector is matched to the
operating voltage.
the fuse in the AC IN on the rear panel. If the fuse needs to
be replaced it is extremely important to replace only with
same fuse type and value.
If no sound output, check...
that the amplifier is turned on (blue LED illuminated)
to make sure the speakers are connected correctly
that the volume on the front panel is not all the way down.
the volume level on the iPod or other audio source.
If bass output is low, check...
speaker wire polarity (verify that wires are going to same
terminals on both speakers + to + and – to -)
that the speaker placement is not too close to a wall or
other obstruction.
that the bass ports on speakers are not blocked by a rodent
or jelly sandwich.
Using Optical cable... ensure that you have removed the small
plastic covers from the Opcial cable connections.
Specifications:
Type: Full class D, digital amplifier
Inputs: Digital USB2.0, 1 x Optical digital, 1 x Coax digital,
Analogue L/R RCA stereo input
Output: SUB-OUT, 1 set speaker output
Main voltage: 220-240V, 50/60Hz
Distortion: @4ohm 20-20Khz 0,3% @8ohm 20-20Khz 0,2%
Input sensitivity: 500mV (RCA) analogue
Frequency Response: (-1db @1Khz): 20Hz-20Khz
Output Power: 2X50W (RMS @4ohm)
Resolution: USB2.0 16bit/48Khz, Optical max. 16 bit/96Khz
Optical processing: Burr Brown 2704 processed via Sp/diff
and then D/A converted by AKM4388A.
(Notice: The Optical input does not support
Bluetooth connection. If you have a Bluetooth adaptor that
only can run fixed 24bit/a92Khz (like Argon BT2), you must
connect it to Argon Audio DA2 via analogue input).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon DA2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon DA2 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info