642215
7
Zoom out
Zoom in
Previous page
1/10
Next page
w w w . a r g o n a u d i o . c o m 7
DA2
Connecting your speakers
Connect the RED (+) and BLACK (-) terminals from the left speaker to the corresponding terminals on the DA2.
Connect the RED (+) and BLACK (-) terminals from the right speaker to the corresponding terminals on the DA2.
Use good speaker cable, to enhance sound quality. Expect to pay around 4-6US$ pr meter.
The binding posts on the DA2 terminals accepts wire up to Ø 4mm or cables with banana plugs.
Insulation on cable must be stripped on all ends.
.
Connect your Argon DA2 to a subwoofer
Connect the single RCA plug to your Argon DA2 SUB OUT.
You
r subwoofer need to have input for one RCA plug just like there is only one RCA output plug from the DA2.
Connect using this single RCA plug at both ends.
Your Subwoofer might have a Left and Right input. In this case you can choose between two options:
Option 1 is to use one single RCA connection on the subwoofer and you can choose either L or R input and leave the other one
unplugged.
Option 2 is to get a cable with one RCA plug at one end for connection to DA2 and two RCA (L and R) at the other end for
connecting to the Subwoofer.
To make things simple, we recommend you to use only one RCA at both ends, even though your subwoofer might have both an
L and R input.
Warning: You should never connect a Subwoofer using the speaker cables from your Argon DA2 as output to the
subwoofer. Using this option can seriously damage your Argon DA2.
Analogue audio connection
Your Argon DA2 is equipped with 1 analogue audio input.
The analogue input is of the left/right RCA type.
You simply connect the left/right RCA plugs to the corresponding plugs on ex. your CD player (if it doesn’t have digital output)
You can also use this connection for analogue sound out from a TV.
Note: that most new TV remotes can control the Argon DA2 volume if connected to variable TV audio out.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon DA2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon DA2 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info