642215
3
Zoom out
Zoom in
Previous page
1/10
Next page
w w w . a r g o n a u d i o . c o m 3
DA2
Connecting your DA2
We recommend that you read the manual of your other
components carefully before connecting your DA2.
Please switch off all equipment when connecting your DA2.
The binding posts on the loudspeaker terminal accepts wire
up to Ø 4mm or cables with banana plugs.
Make sure that positive terminal binding posts on the
speakers (marked + and colored red) are connected to the
positive output terminal binding posts on the DA2 and that
the negative terminals on the speakers (marked – and
colored black) are connected to the negative output terminal
on the DA2. Now you can connect the audio source you
want. (read more about this on page 4 and forward).
.
Care and cleaning
We don’t recommend use of any solvents or cleaners on
Ar
gon DA2 cabinet, the cabinet surface usually only
requires dusting or cleaning with a damp soft cloth
(only use cold clean water).
Environmental information
Argon DA2 complies with international directives on the
Restriction of Hazardous Substances (RoHS) in electrical
and electronic equipment and the disposal of Waste.
Electrical and Electronic Equipment (WEEE) - the crossed
bin symbol indicates compliance and that the products must
Safe
ty instructions
Please store this instruction manual for future reference.
Do not use this product near water or moisture. Clean only
with a dry cloth. Unplug this product from the wall outlet
before cleaning. Place the unit on a solid surface. Do not
block any ventilation openings. Do not put it in a closed
bookcase or a cabinet that may keep air from flowing
through its ventilation openings. Do not install near any heat
sources, such as radiators, heat registers, stoves or other
appliances that produce heat. Protect the power cord from
being walked on or pinched, particularly at plugs and the
point where they exit from the product. Servicing is required
when the product has been damaged. Do not attempt to
service this product yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards.
Please contact the manufacturer to be referred to an
authorized service center near you. To prevent risk of fire or
electric shock, avoid over loading wall outlets, extension
cords, or integral convenience receptacles. Do not let
objects or liquids enter the product. Use proper power
sources. Plug the product into a proper power source, as
described in the operating instructions or as marked on the
product.
be appropriately recycled or processed in accordance with
these directives.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argon DA2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argon DA2 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info