665478
3
Zoom out
Zoom in
Previous page
1/76
Next page
3
Installation site selection - Indoor unit
AVOID
Direct sunlight.
Nearby heat sources that may affect unit performance.
Areas where leakage of flammable gas may be expected.
Locations where large amounts of oil mist may occur
(such as in kitchen or near factory equipment) because
oil contamination can cause operation problems and may
deform plastic surfaces and parts of the unit.
Unsteady locations that will cause noise or possible water
leakage.
Locations where the indoor unit and the remote control unit
will be splashed with water or affected by dampness or
humidity (i.e. in laundries).
To make holes in areas where electrical wiring or conduits
are located.
DO
Select an appropriate position from which every corner of
the room can be uniformily cooled.
Select a sufficiently strong location to support the weight
of the unit.
Select a location where tubing and drain hose have the
shortest run to the outside.
Allow access for operation and maintenance as well as
unrestricted air flow around the unit.
Installation site selection - Outdoor unit
AVOID
Heat sources, exhaust fans.
Direct sunlight.
Damp, humid or uneven locations.
To make holes in areas where electrical wiring or conduits
are located.
DO
Choose places as cool as possible and well ventilated.
use lug bolts or equal to bolt down the unit, reducing
vibration and noise.
ADDITIONAL MATERIAL REQUIRED FOR INSTALLATION (NOT SUPPLIED)
l Deoxidized annealed copper tube for refrigerant tubing connecting the units of the system; it has to be insulated with
foamed polyethylene (min. thickness 8mm).
(go on page 4)
EG
TUBING LENGTH AND ELEVATION DIFFERENCE LIMITS
l PVC pipe for condensate drain pipe (ø int.18mm) in lenght suitable to let the condensate flow into the outside drainage.
l Anti-freeze oil for flare connections (about 30g).
l Electric wire: use insulated copper wires of size and length as shown in the paragraph “WIRING DIAGRAMS”.
MODEL
OUTER DIAMETER MIN. THICKNESS OUTER DIAMETER MIN. THICKNESS
SDIA
6,35 mm 0,8 mm 9,52 mm 0,8 mm
SDIB
6,35 mm 0,8 mm
12,7 mm
0,8 mm
NARROW TUBE
LARGE TUBE
SEE INSTALLATION INSTRUCTIONS OF OUTDOOR UNIT
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Argo SDIBS9DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Argo SDIBS9DC in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Argo SDIBS9DC

Argo SDIBS9DC User Manual - English - 15 pages

Argo SDIBS9DC User Manual - German - 15 pages

Argo SDIBS9DC User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info