2. Safety Precautions, Operation, Servecing and Cleaning (general) 2
2.1 Trailer (generel) 2
2.2 Coupling Head 3
2.3 Overrun Assembly (braked trailer) 4
2.4 Axle(s) 6
2.5 Electrical connection of the lighting system 7
2.6 Wheel and tyre 8
2.7 Jockey wheel 8
2.8 Opening/closing of the side boards 8
2.9 Charging of the trailer 9
2.10 Van Trailer / HT-and VT- versions 9
3. Mounting the mudgards 10
4. Mounting the wheel and tyre 11
4.1 For a central pole beam 11
4.2 For a V-pole beam 11
4.3 Fixation at the frontboard with separate support 12
5. Mounting the high cover 14
6. Mounting the flat cover 14
7. Mounting the ladderrack 17
8. Mounting the steel railing 18
9. Mounting the schockabsorbers (braked versions) 19
10. Mounting the hard top (opening at the side) 19
11. Mounting the protection sideways 26
12. Mounting the extension sides 25
13. Spare Parts 29
1 Introduction
Dear customer,
We congratulate you on purchasing a trailer with the brand Anssems. However, in the interests of safety, before using your trailer it is most important
that you familairize yourself with the operation of the trailer.
If there are any questions about the operation instructions please contact your dealer. Also for servecing and selling from accessories please contact
your dealer. For more information you can fill in the formulaire at our website www.anssems.eu
Please note
It is possible that the pictures in this operation instructions are not the same than the delivered trailer
.
When we are talking about left, right, for and behind, we mean that you are standing behind the trailer.
2 Safety Precautions, Operation, Servecing and Cleaning (general)
2.1 Trailer (general)
•No welding is permitted on the hot galvalised parts.
Other materials (like aluminium and cables) could be infuence, hereby there is a change on lasting damaging or remodelling.
•There is a permit allowing the trailer to be used on roads in your country. This means that the vehicle has been formally offered to the inspection
authority in your country for approval when your trailer was manufactured in our factory. No modifications of any kind (for example different
lighting, wheel rims/tyres or coupling or the addition of an accessory not provided when the vehicle leaves our factory, and due to which the mass
and dimensions may change), may be made.
•Maintenance and cleaning of hot-dip galvanised parts of the vehicle:
The formation of white rust is only a cosmetic fault. The following measures may be taken to avoid this to the extent possible:
•Ensure that there is sufficient air circulation when parking and in connection with the storage of hot-dip galvanised components.
•After driving in winter, the hot-dip galvanised surfaces may be cleaned with clean water in connection with salt/brine (for example using
steam jets).
•For the safety instructions, operation, maintenance and cleaning of trailer component, please refer to items further discussed below, which apply
to your trailer.
•Check whether driving with the trailer is officially allowed. Can the towing vehicle drive with the trailer, and does your driving licence permit you to
drive the combination?
•Ensure conformity with the applicable laws relating to what the load may or may not consist of (such as hazardous substances and passengers).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Anssems GT at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Anssems GT in the language / languages: English as an attachment in your email.
The manual is 6,42 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
