661819
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
ENGLISH
MAKING SAUSAGES
1. Mince the meat
2. Attach the cutter housing to the motor unit
3. Insert the worm shaft into the cutter housing, plastic end first (fig. 8) Place the separator in the cutter housing. Place the sausage
horn on the cutter housing and screw the ring on the cutter housing.
4. Make sure the notches of the separator fit onto the projections of the mincer head.
5. Place the tray on the upright part of the cutter housing.
6. Now the appliance is ready for making sausages. Put the ingredients on a tray. Use the pusher to gently push the meat into the
cutter housing as shown below.
7. Put the sausage skin in lukewarm water for 10 minutes. Then slide the wet skin onto the sausage horn.
8. Push the (seasoned) minced meat into the cutter housing. If the skin gets stuck onto the sausage horn, let wet with some water.
MAKING KEBAB
1. Assemble the cutter housing by inserting the worm shaft, cutting blade and screw the screw ring properly. (Fig. 9)
2. Attach the cutter housing to the motor unit. (Fig. 10)
3. Place the tray on the upright part of the cutter housing. (Fig. 11)
4. Now the appliance is ready for making kebab.
5. Feed the prepared kebab mixture through the kebab maker. Cut the continuous hollow cylinder into the desired lengths and user as
required.
TOMATO JUICER (OPTIONAL)
1. Place the plastic screw locking ring into the sleeve. (Fig. 1)
2. Place the gauze into the sleeve next to the plastic screw locking ring. (Fig. 2)
3. Put the fixing ring through the sleeve until at the end of the sleeve. (Fig. 3)
4. Insert the plastic screw into the hole of the sleeve, and then move it clockwise until it is properly fastened. (Fig. 4)
5. Place the snake into the head, long end first, and turn to feed the snake slightly until it is set into the motor housing. (Fig. 5)
6. Insert the shaft of the snake into the central axis of the screw. (Fig. 6)
7. Put the whole sleeve along with the fixing ring through the screw, and then move the fixing ring clockwise so it will be fastened
tightly. (Fig. 7)
8. Place the plastic cover onto the sleeve. (Fig. 8) Now the appliance is ready for tomato juicing.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina SF-4017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina SF-4017 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info