541403

Allied Telesis AT-GS950-16 Manual

44
Zoom out
Zoom in
Previous page
1/50
Next page
Chapter 3: Troubleshooting
44
Verify that the port is connected to the correct twisted
pair cable. This is to eliminate the possibility that the
port is connected to the wrong network device, such as
a powered off device.
Try connecting another network device to the twisted
pair port with a different cable. If the twisted pair port is
able to establish a link, then the problem is with the
cable or the other network device.
Verify that the twisted pair cable does not exceed 100
meters (328 feet).
Verify that you are using the appropriate category of
twisted pair cable: Category 3 or better for 10 Mbps
operation and Category 5 and Category 5E for 100 and
1000 Mbps operation.
Note
A 1000Base connection may require five to ten seconds to establish
a link.
Problem 4: The LINK/ACT LED for an SFP transceiver is off.
Solutions: The fiber optic port on the transceiver is unable to establish a
link to a network device. Try the following:
Verify that the network device connected to the fiber
optic port is operating properly.
Verify that the fiber optic cable is securely connected
to the port on the media converter channel and to the
port on the remote network device.
Check that the SFP module is fully inserted in the slot.
Verify that the operating specifications of the fiber optic
ports on the SFP transceiver and the remote network
device are compatible.
Verify that the correct type of fiber optic cabling is
being used.
Verify that the port is connected to the correct fiber
optic cable. This is to eliminate the possibility that the
port is connected to the wrong remote network device,
such as a powered off device.
Try connecting another network device to the fiber
optic port using a different cable. If the port is able to
establish a link, then the problem is with the cable or
with the other network device.
Use the switch’s management software to verify that
the port is enabled.
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-GS950-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-GS950-16 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info