541359
17
Zoom out
Zoom in
Previous page
1/32
Next page
iLive Fixed Format Getting Started Guide 17 AP7141 iss.5
SEL
MIXMIX
1
IP
PAN
LR
SEL
MIXMIX
SEL
MIXMIX
SEL
MIXMIX
SEL
MIXMIX
WDG1
AUX
PRE
WDG2
AUX
ASSIGN
PRE/POST FADE
ASSIGN
PRE/POST FADE
ROTARY SHIFT
PRE
IEM1
AUX
STEREO
PRE
IEM2
AUX
STEREO
PRE
FADER
CH
AUX
PRE
PAN
LR
LEV
FADER
CH
IEM1
AUX
STEREO
PAN
LR
PAN
LR
Mix sends (Aux, FX, Matrix) may be
configured in the ROUTING screen as fader
or rotary sends.
Fader sends Faders = sends from channel
Encoders = Pan (if stereo mixes)
Rotary sends Faders = Masters
Encoders = Sends from channels
Shifted encoders = Pan
MASTERS
Current mix status
ON = channel is
assigned
PRE = Channel
send is set pre-
fader.
1
3
2
4
5
CHANNEL
1 Press a channel strip MIX key Its sends are presented across the master strips.
2 Assign the channels to each master Hold down the ASSIGN key then press
master MIX keys to assign to the available mixes. The ON icon displays in the LCDs.
3 Set pre or post fader To set the send to each master pre or post-fade, hold down the
PRE/POST key and then press master SEL keys.
4 Adjust the send levels Aux, FX and matrix mixes can be configured for sends on
faders or rotaries. For groups and DCAs (no send levels), the faders and encoders remain
unaffected.
5 Adjust the image For stereo or multi output main mix use the master encoders to
adjust the send Pan. Hold down ROTARY SHIFT and turn the encoder to adjust Pan for
stereo mixes with encoder sends.
Channel MI
X
view - Sends to all masters from one channel
The ROUTING screen
Turn on the TouchScreen ROUTING page to display the
assignment and routing information for the channel or master
currently selected using a SEL key. This gives you access to
advanced routing options as well as an alternative to using
the MIX keys when adjusting sends and assignments.
In this screen you can view and change the channel mix and
DCA assignments, fader/pan/aux/matrix send levels, pre/post
fade settings and routing options.
Input - Also access the direct output level. Its source is
globally set in the MIXRACK SETUP screen.
Aux - Also select the global channel send signal source for
each mix from a drop down menu.
Aux, Matrix - Choose to mix sends using the faders or rotary
encoders. This can be configured for each mix.
Note - Post-fader sends follow the fader level but get their
source as set in this screen.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath iLive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath iLive in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info