541359
16
Zoom out
Zoom in
Previous page
1/32
Next page
iLive Fixed Format Getting Started Guide 16 AP7141 iss.5
Step 6 – Work with the mix
MUTE
SEL
MIXMIX
PAFL
Press a strip MIX key.
The current mix status is displayed in the lower
part of the strip LCDs. Mix sends are presented
on faders or encoders. The current mix selected
is displayed in the lower status bar of the screen.
Note – Make sure you are working with the
correct mix. After making your adjustments
remember to turn off the MIX key or return to your
main mix. Turning off the MIX key automatically
returns to the main mix.
There are two ways to work with the mix:
1 Press a master strip MIX key Its sources are presented across the channel strips.
2 Assign channels to the master To assign individual channels, hold down the
ASSIGN key then press channel MIX keys. To assign all, hold down ASSIGN then press the
mix master MIX key. The ON icon displays in the LCD for assigned channels.
3 Set pre or post fader To set individual sends pre or post-fade, hold down the
PRE/POST key and then press channel SEL keys. To set all, hold down PRE/POST and press
the mix master SEL key.
4 Adjust the send levels Aux, FX and matrix mixes can be configured for sends on
faders or rotaries. For groups and DCAs (no send levels), the assignments are displayed on
the LCDs. The faders and encoders remain unaffected.
5 Adjust the image Use the encoders to adjust Pan for stereo or multi output main mix
type. Hold down ROTARY SHIFT and turn the encoders to adjust the second image control if
one is available, for example LCRplus Blend, Sub or M fill level, or encoder mix Pan.
1
IEM2
AUX
FADER
CH
STEREO
SEL
MIXMIX
3
IP
AUX
PRE
PAN
LR
4
IP
AUX
PRE
PAN
LR
2
IP
AUX
PRE
PAN
LR
1
IP
AUX
PAN
LR
ASSIGN
PRE/POST FADE
ASSIGN
PRE/POST FADE
ROTARY SHIFT
SEL
MIXMIX
SEL
MIXMIX
SEL
MIXMIX
SEL
MIXMIX
4
IP
AUX
PRE
PAN
LR
LEV
FADER
CH
Mix sends (Aux, FX, Matrix) may be
configured in the ROUTING screen as
fader or rotary sends.
Fader sends Faders = Sends
Encoders = Pan (if a stereo send)
Rotary sends Faders = Channel
(trim) Encoders = Sends
Shifted encoders = Pan
Current mix status
ON = channel is
assigned
PRE = Channel
send is set pre-
fader.
3
2
4
5
Master MIX view - All sends to one master
MASTER
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath iLive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath iLive in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info