541359
11
Zoom out
Zoom in
Previous page
1/32
Next page
iLive Fixed Format Getting Started Guide 11 AP7141 iss.5
Step 2 – Recall a ‘Template Show’ as a starting point
The iLive has a fully configurable audio architecture and control layout and socket patching letting you
customise the way you work. It would be a daunting task for the new user if we gave them a ‘blank
canvas to start from scratch. Instead we have provided a set ofTemplate Show memories which give
you a choice of classic console format to load in as a quick starting point. These emulate the familiar
architecture and logical layout of well equipped analogue consoles. Once you are comfortable working
with iLive you can make changes to your set up and save these as your own ‘User’ Shows.
A default show is already loaded when the iLive is shipped from the factory. This is FOH-LRSub.
Details of the layout and patching of this show are presented at the rear of this guide.
Note: Recalling a Show overwrites all the system
settings including the DSP mix architecture, Surface
configuration, current parameters, all the Scene and
Library memories. Archive your current settings as
a User Show before recalling the Template Show if
you want to keep these to use again in the future.
Template Shows available:
FOH These make a good starting point for general
purpose live mixing whether FOH only or mixing
monitors from FOH. They provide a classic Group /
Aux / Mains / Matrix bus architecture and differ only
in the type of main mix configured.
MON These recall a format and layout suitable for
dedicated monitor mixing, with a combination of
mono and stereo auxes and engineer’s dual
Wedge/IEM monitor.
MicSplit Use these when the system gets its
inputs from a ‘master’ console via a digital mic split
such as Ace, MADI or EtherSound.
Load a Template Show
Press the UTILITY key below the TouchScreen -
UTILITY / Configuration / Show Manager.
Highlight the Templates item. Touch the + button
to expand the tree. Select a show from the list and
touch Recall. A show can take several minutes to
load depending on the amount of data stored.
Recall settings for your iLive system
When the recall has finished, a 'Go to SCENE page'
message is displayed on the strips. This is to
remind you to load two Scenes, one to match your
iLive MixRack and the other your Surface. These
recall the strip layout for your Surface and configure
the output patching for your MixRack. Press the
SCENES key below the TouchScreen. Recall the
two Scenes.
Customise and save your settings
You may wish to make changes to the configuration
and save the new settings as a User Show. Before
you do this we suggest you Clear the contents of
Scene 1 - 16 ready for your own application.
FOH-LRstereo Standard stereo main mix
with LR master faders and channel Pan.
FOH-LRSub Stereo with separate Sub mix
quickly accessible on each channel using a
shifted rotary function.
FOH-LCRpan Conventional LCR panning -
left through centre to right.
FOH-LCRplus LCR image control with Pan
and Blend (LR to C) controls. Similar to the
Allen & Heath ML Series consoles.
MON-8m6st 8 mono + 6 stereo mixes plus
Wedge/IEM monitor.
MicSplit_FOH-LRSub FOH mixer receiving
its inputs from the monitor console via the
Port B digital audio network.
MicSplit_MON-8m6st Monitor mixer
receiving its inputs from the FOH console via
the Port B digital audio network.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath iLive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath iLive in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info