541359
10
Zoom out
Zoom in
Previous page
1/32
Next page
iLive Fixed Format Getting Started Guide 10 AP7141 iss.5
Switch power on
Switch on the MixRack first, then the
Surface by pressing their rear panel power
ON switches.
The system remembers the settings on
power down. These are restored next time
you switch the system on.
Boot up time
MixRack It takes around 15 seconds for
the DSP to start passing audio with the
same settings current at last power down.
You should hear the relays click as they
connect the outputs once the MixRack has
booted.
Surface In just over 1 minute the strip
LCD displays turn on and the Surface is
ready to take control of the mix.
TouchScreen It takes a little longer for
the TouchScreen to complete its boot up
process. In around 2 minutes the screen is
ready and the system fully booted.
Status indicators
Once booted, check that the blue POWER
ON indicators are lit and the various
system status LEDs indicating correctly.
Secure the mains cable in
the clip provided here.
At the MixRack:
Indicates that the
audio is sync locked to
the selected clock
source.
At the Surface:
Indicates that the
surface audio is sync
locked to the MixRack.
The yellow Lnk/Act LEDs for
connected sockets flash at a
steady rate once the link is
established.
If one or more pulse at a slow
rate or the red Err LED remains
lit then check that the cables
are correctly plugged in and are
not faulty.
The STATUS screen
With all the TouchScreen keys turned off and no channel selected the screen displays status information
about the system. A red cross displays in place of the green tick if a problem is detected. A yellow
triangle also displays in the lower toolbar.
Displays the current firmware
version loaded. A red cross
warns if a software error has
been detected. The green tick
should return after viewing the
Event Log in the UTILITY /
Diagnostics screen.
Indicates that the MixRack
is sync locked to the
selected audio clock
source.
A green tick indicates that the
temperature sensed within the rack and
surface is within normal operating range.
Information about the ACE Surface to MixRack audio/control
connection. Status displays error detection over the previous
minute in time, green = none, yellow = few, red = many errors.
Net Bridge indicates correct operation of the Ethernet link over
ACE. Surface Lock indicates that the Surface audio is sync
locked to the MixRack.
If an optional audio network
card is fitted to the MixRack
Port B slot then its status
information is displayed here.
Real time clock. You can change
the time using the UTLITY /
Configuration screen.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath iLive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath iLive in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info