541389

Allen-Heath GL-2 Manual

15
Zoom out
Zoom in
Previous page
1/16
Next page
GL2
2-TRACK RECORDER
groups
stereo amplifier
LEFT
RIGHT
MUSICIANS CUE
MONITOR LOUDSPEAKER SYSTEM
stereo
amplifier
outputs
inputs
4-TRACK MULTITRACK
returns
line ins
Y-splitters
send
return
STEREO EFFECTS
2
1
PATCHED EFFECT
POST
PRE
up
Set the REV
switches to the up
position for group
(track) and L-R
outputs.
These are often used in location recording to prevent
unexpected signal peaks overloading the recorder.
COMPRESSOR/LIMITERS
(or repatch leads as required)
Here, a typical small STUDIO RECORDING setup
is shown with 4-track multitrack and 2-track master-
ing recorders (ideal for hard disk and DAT recording
systems). The dedicated 2-track sends or the balanced
L,R outputs may be used to feed the 2-track.
Select aux 1 to 4 post-fade for the effects processors.
Two stereo devices are illustrated here with their
outputs returned to the stereo channels. Additional
floating effects devices may be patched into the chan-
nel or output inserts as shown.
Select aux 5 and 6 pre-fade to provide a stereo cue to
the musicians headphones. Alternatively these may be
set post-fade for additional effects and the L,R outputs
used for cue.
The additional rear panel phones/monitor output feeds
the studio reference loudspeaker system to monitor the
console signals and recorded tracks without interrupt-
ing the recording itself.
For LIVE RECORDING the channel inserts may be
tapped (link send to return) to provide additional pre-
fade direct feeds to a multitrack.
aux 5
aux 6
stereo and multitrack ... studio ... live ... location ... audio visual ... production ...
RECORDING
MULTITRACKING: To
monitor the track returns select
RET and adjust LEV and PAN for
the required monitor mix.
Alternatively, use the channel line
inputs if a dedicated musicians cue
feed (aux 5,6) is required.
To monitor the group sends to the
multitrack select GRP.
MIXDOWN: Use GRP for
subgrouping or RET for effects
returns. Mix the track returns
through the channel line inputs.
… 15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL-2 in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info